Aberdeenshire · Scotland
Bath Repair for Foveran homes
Damaged bath in Foveran? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A chip where the taps sit
- Rust spots around the plughole
How the visit works
Arrival times are agreed in advance. On site, it takes a few hours, depending on the damage for most jobs. We leave the room clean.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
- Let the surface dry out before the visit
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
About our bath repair in Foveran
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with a failed DIY repair that’s discoloured or lifting and chips under the taps, we can usually put it right, on pressed steel enamel, roll-top & freestanding and acrylic alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Foveran (AB41)
- County
- Aberdeenshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Foveran
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Our work in Foveran
Foveran is about 11 miles north of Aberdeen, in Aberdeenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Foveran is one of 161 towns and villages in Aberdeenshire we cover.
Postcode districts we cover here: AB41. Whether you live on Blairythan Place, Turin Way and Mcbey Way or a nearby road, we can come to you. Close by, we cover Newburgh (2 miles north-east), Cultercullen (3 miles west), Hill of Keir (3 miles south-west), Balmedie (4 miles south) and Udny Station (4 miles west). We also work in nearby towns such as Inverurie (12 miles west), Westhill (14 miles south-west), Ellon (5 miles north), Garioch (12 miles west), Kemnay (15 miles west) and Kintore (12 miles south-west).
Landmarks near Foveran
Locally, our jobs take us to homes close to Foveran Parish Church, among other places. Further afield, we also cover the area around Foveran Castle (1.4 miles east) and Kingseat Hospital (5 miles south-west). For a walk, there is Cotehill Loch.
Repair or replace in Foveran?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Colour mixed on the day to match
- Everything repaired in place
- Free fixed quotes from pictures
- Every repair guaranteed for a year
Read our prices page and bath cost comparison.
Signs you need bath repair in Foveran
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people contact us after spotting one of these:
- A failed DIY repair that’s discoloured or lifting
- Scuffs and scratches in the surface
- Rust by the waste and overflow
- Impact holes in acrylic
Before booking anyone
- Whether a trained technician does the job
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- When it can be used again
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How to look after the repair
After the repair has cured, a few habits help it last:
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Towns and villages near Foveran
What else we do in Foveran
What affects the price in Foveran
Repairs from £95. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- What the surface is made of
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Questions from Foveran
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What happens next?
You’ll get a fixed quote back. You’re under no obligation.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Which areas do you work in?
Across the UK, so Foveran is covered. Our prices are the same everywhere.
Do you come to Foveran?
Yes. We cover the whole UK and come to Foveran. Send photos and we’ll quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
