Cornwall · England
Bath Repair in Freathy
Bath repair for Freathy, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit
Bath repair at your home in Freathy
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Common call-outs are for a kit repair that didn’t last and damage beneath the taps, on roll-top & freestanding, cast iron enamel and acrylic.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Freathy (PL10, PL11)
- Area hub
- Cornwall
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Freathy
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Most people contact us after spotting something like this:
- A chipped rim or side
- Deep scratches in acrylic
- Rust spots around the plughole
- An old repair that has yellowed or come loose
What your quote should include
- What aftercare is recommended
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Landlord and trade work in Freathy
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repair or replace in Freathy?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Same prices wherever you are
- Dust sheets down, tidy finish
- A fixed quote before you book
- Honest advice, even when it means no job
Read our full price list and bath cost comparison.
FAQs for Freathy
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
What happens once I’ve sent photos?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
More services for Freathy
Honest limits
A few problems are outside what a surface repair can do:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Freathy
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes two to three hours for most chips, and we will tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
What bath repair costs
Prices start from £95. We charge the same across the UK, including Freathy. What changes the price is:
- The material
- How many items we do on one visit
- Access to the area
- How hard the colour is to match
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Any details about the material
The quickest way to a price is to send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Where we work around Freathy
Freathy is about 4 miles south-west of Stonehouse, in Cornwall. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 644 places in Cornwall, from the larger towns to small villages.
We work across the PL10 and PL11 postcode area and the streets around it. Close by, we cover St John (1 mile north-east), Antony (2 miles north), Millbrook (2 miles east), Insworke (2 miles east) and Southdown (2 miles east). We also work in nearby towns such as Stonehouse (4 miles north-east), Saltash (5 miles north), Liskeard (12 miles north-west), Addington (12 miles north-west), Looe (9 miles west) and Torpoint (3 miles north-east).
Landmarks near Freathy
Our clients here include homes close to Church of St John, among other places. The nearest railway station is St Germans station, roughly 4.2 miles north-west. Further afield, we also cover the area around Plymouth General Hospital (3.6 miles north-east) and Trematon Castle (3.8 miles north). Not far away are Penlee Battery.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- A dripping tap stains enamel, so fix it early
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
