Cornwall · England

Bath chip & crack repair in Torpoint, Cornwall

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Torpoint and across Cornwall. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A cracked acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Torpoint homes

Bath repair in Torpoint, done in place

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Whether it’s holes from dropped items and hairline or through cracks in acrylic, we can generally put it right, on roll-top & freestanding, pressed steel enamel and acrylic alike.

Your repair is guaranteed for a year, as with every job we do.

Before and after: a chipped, rust-stained bath around the plughole
Where
Torpoint (PL11)
Region
Cornwall
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Where we work around Torpoint

Torpoint is about 3 miles south-east of Saltash, in Cornwall. Wherever you are in the PL11 postcode area, a technician comes to you. We work in 644 places across Cornwall, from the larger towns to small villages.

Our visits in PL11 work the same way as everywhere else we cover. From Elliot Square, Roeselare Avenue and Buller Close or a nearby road, a technician can come to you. You’ll find Torpoint on the A374, so it’s easy for us to reach. If you are just outside Torpoint, we cover Wilcove (1 mile north), Maryfield (1 mile north-west), Southdown (2 miles south), Insworke (2 miles south) and St John (2 miles south-west). Larger places within reach include Saltash (3 miles north-west), Liskeard (13 miles north-west), Addington (12 miles north-west), Looe (11 miles west), Burraton Coombe (3 miles north-west) and Callington (10 miles north-west).

Landmarks near Torpoint

Around Torpoint, we work in homes near Torpoint Community College, Carbeile Junior School and Devonport Library and the streets around them. Nearby too are Church of St James (less than half a mile east), Carbeile Inn (within half a mile west), UTC Plymouth (1.3 miles east) and Antony (1.1 miles north-west). For rail, the closest station is Dockyard station, roughly 1.3 miles east of the centre. Well-known places in the area include Plymouth General Hospital (0.9 miles east) and Elliott's Shop (2.3 miles north). Not far away are Penlee Battery.

Map of Torpoint © OpenStreetMap contributors

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Avoid scourers, wire wool and gritty cream cleaners
  • If an acrylic bath flexes, have its feet adjusted
  • Fix dripping taps early to stop staining and limescale
  • Use a soft cloth and washing-up liquid for everyday cleaning

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Repair or replace: which is better?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why us?

  • Repair technicians who travel to you, UK-wide
  • Honest advice, even when it means no job
  • Most jobs done in one visit
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing or resurfacing vs replacement cost guide.

Repairs by material

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

What bath repair costs

Repairs from £95. Prices are worked out job by job, from your photos. The main factors are:

  • Unusual colours or finishes
  • What kind of damage it is
  • Previous DIY repairs that have to come out
  • The material and finish

Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send photos for a quote

You can take the photos on your phone, there is no need for anything special. Just ensure we can see:

  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • A clear, close picture of the problem area

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in acrylic we can’t reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Questions from Torpoint

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Will the price change on the day?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

When can I have a bath again?

Normally by the following day, depending on the repair.

How invisible is a bath repair?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.

Landlords, agents and businesses in Torpoint

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How the visit works

We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the next day.

Preparing for the visit

  • Ensure the area is dry
  • Keep a parking space free if you can
  • Mention any parking restrictions or tricky access

Ask for a price

For a price in Torpoint, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

What we are called out for in Torpoint

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

Send us a picture if you notice any of these:

  • Rusty patches near the plughole
  • Snagging damage from a refit
  • A kit repair that didn’t last
  • Hairline or through cracks in acrylic

What to look for in a quote

  • Who turns up on the day
  • How soon you can use it again
  • If travel is included in the price
  • What aftercare is recommended

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.