York · England

Bath chip & crack repair in Fulford, York

Bath repair for Fulford, without a refit. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • A hole punched through by something heavy
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Fulford?

Bath repair in Fulford, done in place

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. Common call-outs are for snagging damage from a refit and scuffs and scratches in the surface, in roll-top & freestanding, cast iron enamel and pressed steel enamel.

You get a one-year guarantee, the same in Fulford as everywhere else we work.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Fulford (YO10, YO19, YO23)
Region
York
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

Our work in Fulford

Fulford is about 1 mile south of Clementhorpe, in York. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Fulford is one of 79 towns and villages in York where we work. We work right across the region, from Fulford to Leeds (21 miles away).

Postcode districts we cover here: YO10, YO19 and YO23. Whether you live on Danum Road, Main Street and School Lane or anywhere nearby, a technician can come to you. We also travel to Fishergate (1 mile north), Middlethorpe (1 mile south-west), South Bank (1 mile north-west), Clementhorpe (1 mile north) and Heslington (1 mile east). Within a short drive, we also cover Clifton (3 miles north-west), Haxby (5 miles north), Strensall (7 miles north), Huntington (3 miles north), Rawcliffe (3 miles north-west) and Copmanthorpe (3 miles south-west).

Local landmarks in Fulford

Typical jobs here are in homes near The Saddle Inn, Knavesmire Secondary School and Church of Saint Oswald, among other places. You’ll also find Rowntree Park (0.7 miles north-west), Knavesmire Primary School (0.8 miles north-west) and Fulford School (within half a mile south-east). The closest station to Fulford is York station, about 1.6 miles north-west. Nearby you will also find York Designer Outlet (1.1 miles south) and Naburn Hospital (1.4 miles south). Open spaces near Fulford include Siward's Howe.

  • Local facilities include Middlethorpe Without (0.8 miles south-west)
Map of Fulford © OpenStreetMap contributors

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Your questions about bath repair in Fulford

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

How do I get a price for bath repair in Fulford?

Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Common problems we fix in Fulford

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.

Signs it’s time to call us include:

  • Damage beneath the taps
  • Damage done while the bathroom was being fitted
  • Scratches you can feel with a fingernail
  • Impact holes in acrylic

Questions to ask before you book

  • How long the guarantee is and what it covers
  • How changes to the job are handled
  • Whether a trained technician does the job
  • What aftercare is recommended

Choosing a repair company

Looking after it afterwards

Once the work has cured, treat it gently:

  • Have new chips seen to early
  • Give the bath a quick rinse after use
  • Protect the bath with a towel when doing jobs nearby
  • Don’t leave razors or cans standing in the bath

There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

How to get a price

For a price in Fulford, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

Should you replace it?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • No extra charge for your area
  • A year’s guarantee on all work
  • A fixed quote before you book
  • We leave the room as we found it

Read our prices page and bath cost comparison.

What bath repair costs

Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • Unusual colours or finishes
  • Any earlier repairs that need removing first
  • What kind of damage it is
  • How much damage there is

A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

Two or three clear photos are usually enough. Try to include:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the entire bath
  • Something in shot to show the size
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

What we cannot put right

Before you book, it’s worth knowing the limits:

  • Cracks in acrylic we cannot reach from underneath
  • A bath worn all over, where resurfacing makes more sense
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.