West Sussex · England

Bath chip & crack repair in Furnace Wood, West Sussex

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Furnace Wood and across West Sussex. Send pictures for a fixed quote.

  • Repairs from £95
  • Rusty patches near the plughole
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Furnace Wood homes

Bath repair at your home in Furnace Wood

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the next day. We regularly repair acrylic, pressed steel enamel and roll-top & freestanding, and people most often call us about snagging damage from a refit and damage beneath the taps.

For a rural address like Furnace Wood, we plan the journey and the visit in advance. Let us know about access and where to park, and we’ll take care of the rest.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Furnace Wood (RH19)
Area hub
West Sussex
Warranty
12 months on all our work
Price
From £95. A fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Common questions in Furnace Wood

I let a flat near East Grinstead station. Can you help between tenants?

Yes, rental work is a big part of what we do, and a repair between tenants is generally quicker than replacing.

Do you come out to small places like Furnace Wood?

Yes, we do: small places like Furnace Wood are covered as standard. Tell us if access is tricky.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Can you repair something that’s been repaired before?

Typically, yes. The old repair comes out first.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we tidy up before we leave.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

What a repair can’t fix

Before you book, it’s worth knowing the limits too:

  • Flexing caused by a failed cradle or loose feet
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath worn all over, where resurfacing makes more sense

Send us pictures and we’ll tell you honestly.

Materials we work on in Furnace Wood

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic

Bath repair around Furnace Wood

Furnace Wood is about 3 miles west of East Grinstead, in West Sussex. Our technicians come to clients in Furnace Wood and the surrounding area, so you do not need to take anything anywhere. Furnace Wood is one of 371 towns and villages in West Sussex we cover. We work right across the region, from Furnace Wood to London (25 miles away).

We cover every part of the RH19 postcode area for bath repair. Local streets include Lake View Road, Felcot Road and Furnace Farm Road. We also cover the places around Furnace Wood: Domewood (1 mile north-west), Snow Hill (1 mile west), Felbridge (1 mile east), Crawley Down (1 mile south) and Newchapel (2 miles north-east). Larger places within reach include Crawley (6 miles west), Horsham (12 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (3 miles east) and Broadfield (7 miles south-west).

Near you in Furnace Wood

We visit homes around Imberhorne School, among other places. For rail, the closest station is East Grinstead station, about 2.5 miles south-east of the centre. A little further out are Effingham Park Motor Museum (0.9 miles west) and Queen Victoria Hospital (3.1 miles east). The countryside around Furnace Wood includes Hedgecourt Lake.

Map of Furnace Wood © OpenStreetMap contributors

Repair or replace: which is better?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Older homes around Furnace Wood may have sizes and fittings that new pieces do not match. Repairing avoids those problems.

Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

What you get with us

  • Everything repaired in place
  • One visit for most repairs
  • We’ll tell you if it’s not worth repairing
  • CHAS and Constructionline accredited

See our Prices page And Resurfacing vs replacement cost guide.

Aftercare tips

Aftercare is simple:

  • Do not leave razors or cans standing in the bath
  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners
  • Protect the bath with a towel when doing jobs nearby

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

We work for landlords, letting agents and housing providers in Furnace Wood as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

What happens on the day

There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to two to three hours for most chips, tidy-up included. For a rural address like Furnace Wood, we plan the journey in advance: tell us about narrow lanes, gates, long drives or where to park. We bring everything needed for the bath repair, so there is no second trip.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the following day.

How to prepare

  • Ensure the area is dry
  • Let us know which floor the room is on
  • Let us know if it has been repaired before

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a quote

Related advice

What we’re called out for in Furnace Wood

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Clients usually contact us about:

  • Damage done while the bathroom was being fitted
  • Damage beneath the taps
  • Deep scratches in acrylic
  • A kit repair that didn’t last

If you let a flat or house near East Grinstead station (about 2.5 miles south-east), we repair baths between tenancies so it’s ready to let again quickly.

Before booking anyone

  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • Whether cleaning and preparation are in the price
  • What protection goes down before work starts

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.