Aberdeenshire · Scotland

Bath Resealing in Fyvie

Bath resealing in Fyvie without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Gaps by the taps
  • A messy previous reseal
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Fyvie?

Bath resealing in Fyvie without replacing anything

The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why so many DIY reseals peel. Typical jobs include gaps by the taps and black spots in the silicone, across baths, shower trays & enclosures and wet rooms.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Area
Fyvie (AB53)
County
Aberdeenshire
Guarantee
One year on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Your questions about bath resealing in Fyvie

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

How do I get a price for bath resealing in Fyvie?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

My seal keeps tearing. Why?

Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

What happens on the day

You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take about two hours for a bath, and you’re welcome to carry on with your day while we work.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Ensure the room can be ventilated
  • Tell us about parking, stairs or access
  • Let us know if it has been repaired before

Ask for a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Get a free quote

Advice

Do you need bath resealing in Fyvie?

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

These are the problems we’re asked about most:

  • Sealant that is split or lifting
  • Black spots in the silicone
  • Water getting behind the bath or tray
  • Gaps by the taps

Questions to ask before you book

  • What aftercare is recommended
  • Who will actually do the work
  • If travel is included in the price
  • How the colour is matched

How to compare quotes

Where we work around Fyvie

Fyvie is about 10 miles north of Inverurie, in Aberdeenshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Fyvie is one of 161 places in Aberdeenshire where we work.

All of AB53 is covered, from the main roads to the quietest streets. You’ll find streets such as Main Street, School Road and Parnassus Gardens. If you are just outside Fyvie, we cover St Katherines (2 miles south-east), Rothienorman (3 miles south-west), Meikle Wartle (5 miles south-west), Methlick (6 miles east) and Daviot (6 miles south). Further out, we also cover Inverurie (10 miles south), Ellon (13 miles east), Turriff (8 miles north), Huntly (15 miles west), Garioch (10 miles south) and Kemnay (14 miles south). Some remote addresses need extra planning, so call us to arrange it.

Landmarks near Fyvie

In Fyvie, that means homes near St Peter's Church, among other places. Well-known places in the area include Gight Castle (3.8 miles east).

Map of Fyvie © OpenStreetMap contributors

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Fyvie, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Why it’s worth resealing in Fyvie

Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Fyvie

  • Work done at your home or business
  • Every repair guaranteed for a year
  • Most jobs done in one visit
  • Honest advice, even when it means no job

Take a look at our prices page.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

Baths are resealed with water in them, to open the joint fully.

When we’d advise against a repair

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Movement in the bath or tray
  • Hidden water damage
  • Tiles that move, until they’re refixed

If in doubt, send photos and we’ll say what we think before you book.

Surfaces we repair

  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

What affects the price in Fyvie

You will know the full cost before you book. We look at:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • How many areas need work
  • Unusual colours or finishes

The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.