Aberdeenshire · Scotland

Bath Repair for Methlick homes

Our technicians come to Methlick for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • A cracked acrylic bath
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Methlick

What affects the price in Methlick

Repairs from £95. You will not pay by the hour. The price is based on:

  • Any earlier repairs that need removing first
  • How many areas need work
  • Unusual colours or finishes
  • What kind of damage it is

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Two or three clear pictures are normally enough. Try to include:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Natural light rather than flash
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Bath repair in Methlick, done in place

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most frequently call us about a chip where the taps sit and a chipped rim or side.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Methlick (AB41)
Region
Aberdeenshire
Cover
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

How the visit works

We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings
  • Have a window or extractor fan available

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Advice

Methlick and nearby

Methlick is about 11 miles north-east of Inverurie, in Aberdeenshire. Our repair technicians come to customers in Methlick and nearby villages, so nothing has to leave your home. Methlick is one of 161 places in Aberdeenshire where we work.

Postcode districts we cover here: AB41. That includes homes on Gordon Crescent, Manse Road and Mansefield. We also travel to Tarves (4 miles south), St Katherines (5 miles west), Auchnagatt (5 miles north-east), Fyvie (6 miles west) and Turfhill (6 miles north). Further out, we also cover Inverurie (11 miles south-west), Ellon (7 miles south-east), Turriff (11 miles north-west), Garioch (11 miles south-west), Kemnay (15 miles south-west) and Kintore (14 miles south).

Landmarks near Methlick

Around Methlick, we work in homes near Methlick Parish Church. Well-known places in the area include Gight Castle (2.4 miles north-west) and Old School Museum (3.7 miles south). The countryside around Methlick includes Upper Lake.

Map of Methlick © OpenStreetMap contributors

Signs you need bath repair in Methlick

A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.

Most people get in touch when they notice one of these:

  • Scratches you can feel with a fingernail
  • An old repair that has yellowed or come loose
  • Rust by the waste and overflow
  • Snagging damage from a refit

Before you book anyone

  • When it can be used again
  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work

Our hiring checklist

Keeping it looking good

So the finish stays in good condition for years:

  • Don’t leave razors or cans standing in the bath
  • Get any new chip repaired before it rusts
  • Get a dripping tap fixed promptly
  • Put a towel in the bath if you are working above it

Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We’re used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.

When we’d advise against a repair

We won’t take on work that won’t last, so these are the limits:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we can’t reach from underneath
  • Leaking fittings, which need a plumber

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Methlick: your questions answered

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Do you come to Methlick?

Yes, we do. We send a technician to Methlick for every job, with no extra charge for travel.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you cover the whole of Aberdeenshire?

Everywhere in the UK, Methlick included. Travel is included in the price.

Repairs by material

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.