Glasgow · Scotland
Bath Repair for Garscadden homes
We travel to Garscadden for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- Chips caused by builders
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- How many areas need work
- The material
- Doing more than one item at once
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- Details of any past repairs
- Natural light rather than flash
- Any details about the material
- Something in shot to show the size
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Bath repair in Garscadden without replacing anything
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Whether it’s chips along the edge of the bath and rust spots around the plughole, we can usually put it right.
All our work comes with our one-year guarantee.
- Area
- Garscadden (G13, G14, PA4)
- Area hub
- Glasgow
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams in Glasgow and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Let us know about parking or access
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Common questions in Garscadden
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Garscadden and nearby
Garscadden is about 1 mile north-east of Renfrew, in Glasgow. Across the G13 area, a technician comes to you. Our repair technicians cover 183 places in Glasgow, from the larger towns to small villages.
All of G13, G14 and PA4 is within our area. From Dyke Road, Lapwing Road and Burnham Road or a nearby road, we can come to you. Garscadden is on the A741, which makes it straightforward to reach. We also cover the places around Garscadden: Scotstounhill (1 mile east), Yoker (1 mile north-west), Scotstoun (1 mile south-east), Jordanhill (1 mile east) and Knightswood (1 mile north-east). We also work in nearby towns such as Glasgow (4 miles south-east), Hillhead (3 miles east), Dowanhill (3 miles east), Woodlands (4 miles east), Woodside (4 miles east) and North Kelvinside (3 miles east).
Around Garscadden
We visit homes around Scotstoun Primary School, Robertson Park and St David's Parish Church, among other places. Other local landmarks include Knightswood Secondary School (1.1 miles east), The Lord of the Isles pub (0.6 miles south) and Jordanhill College (1 mile east). There’s a railway station in Garscadden itself: Garscadden station. Further afield, we also cover the area around Drumchapel Hospital (1.4 miles north) and Renfrew Castle (0.7 miles south-west). Not far away are Kilmardinny and Castle Hill.
Repairing versus replacing in Garscadden
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- One visit for most repairs
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
See our prices page and bath cost comparison.
Looking after it afterwards
Nothing complicated is needed:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Towns and villages near Garscadden
What else we do in Garscadden
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
