Glasgow · Scotland
Bath Repair for Knightswood homes
Our repair technicians come to Knightswood for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Bath repair in Knightswood, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Whether it’s impact holes in acrylic and chips along the edge of the bath, we can help.
Every repair comes with our one-year guarantee.
- Where
- Knightswood (G13)
- Region
- Glasgow
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
When a repair is not the answer
To be straight with you, there are a few things a repair won’t fix:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Knightswood
Knightswood is about 2 miles south of Bearsden, in Glasgow. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 183 places in Glasgow, from the larger towns to small villages.
All of G13 is covered. That includes homes on Ryvra Road, Thane Road and Saxon Road and the roads around them. We also cover the places around Knightswood: Anniesland (1 mile south-east), Netherton (1 mile north-east), Temple (1 mile east), Anniesland Cross (1 mile south-east) and Jordanhill (1 mile south). We also work in nearby towns such as Glasgow (4 miles south-east), Woodlands (3 miles south-east), Woodside (3 miles south-east), North Kelvinside (3 miles south-east), Garnethill (3 miles south-east) and Anderston (3 miles south-east).
Near you in Knightswood
We visit homes around Scotstoun Primary School, Knightswood Secondary School and Lock 27 pub. You’ll also find Knightswood St Margaret's Parish Church (less than half a mile north-west), Jordanhill College (0.7 miles south) and Victoria Park (1.3 miles south). For rail, the closest station is Westerton station, roughly 0.8 miles north of the centre. Nearby you’ll also find Renfrew Castle (1.8 miles south-west) and Renfrew Museum (2.1 miles south-west). The countryside around Knightswood includes Kilmardinny and Castle Hill.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
What you get with us
- No need to remove anything
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
Take a look at our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Knightswood
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
If you can see any of these, send us a picture:
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
- Cracks in an acrylic bath
Comparing quotes
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Your questions about bath repair in Knightswood
How do I get a price for bath repair in Knightswood?
Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Which areas do you work in?
All of Glasgow, and the rest of the UK. There is no extra charge for travel.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Towns and villages near Knightswood
What else we do in Knightswood
What bath repair costs
Prices start from £95. There’s no charge for travel to Knightswood. The price comes down to:
- Any earlier repairs that need removing first
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
Phone photos are fine. Make sure they show:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Email us a photo of the damage and one of the whole item, and tell us you’re in Knightswood, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
