Wiltshire · England
Bath Repair for Gasper homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Gasper, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we’ll talk to you before going ahead.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the day after.
Preparing for the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
Get a quote
Upload photos of the damage and one of the entire item, and tell us you’re in Gasper, and we’ll reply with a fixed quote.
Related advice
About our bath repair in Gasper
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We are often asked to fix deep scratches in acrylic and rust by the waste and overflow, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Gasper (BA12)
- County
- Wiltshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Gasper
More services for Gasper
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Access to the area
- The size and number of damaged areas
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Where you are, by postcode
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
What you get with us
- Fixed prices from your pictures
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- One visit for most repairs
Read our pricing or bath cost comparison.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Gasper and the surrounding area
Gasper is about 9 miles south of Frome, in Wiltshire. Clients in Gasper get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Gasper is one of 425 towns and villages in Wiltshire we cover.
Every address in BA12 is covered, from the main roads to the quietest streets. Close by, we cover Pear Ash (1 mile south), White Cross (1 mile south-east), Penselwood (1 mile south), Zeals (1 mile south-east) and Bourton (2 miles south-east). Larger places within reach include Westbury (13 miles north-east), Warminster (10 miles north-east), Mere (3 miles east), Tisbury (11 miles east), Boreham (10 miles north-east) and North Bradley (15 miles north).
What’s near Gasper
We visit homes around Church of St Peter and the streets around them. The closest station to Gasper is Bruton station, roughly 4.8 miles west of the centre. Other landmarks nearby include Four Towers (1.7 miles west) and Mere Museum (3 miles east). For a walk, there’s Aaron's Hill.
What we cannot put right
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Do you need bath repair in Gasper?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Keep an eye out for any of the following:
- Damage beneath the taps
- Chips caused by builders
- Impact holes in acrylic
- Rust spots around the plughole
Questions to ask before booking
- Aftercare advice
- Whether the price is fixed and includes VAT
- What prep work is covered
- Whether there are any call-out or travel charges
FAQs for Gasper
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What happens next?
We come back with a fixed price, usually with dates to choose from. You’re under no obligation.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
About our accreditations · Every repair comes with a one-year guarantee.
