Warrington · England
Bath Repair in Golborne
Problem with your bath in Golborne? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- A chipped rim or side

Bath repair at your home in Golborne
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Common call-outs are for rust spots around the plughole and chips under the taps, across acrylic, whirlpool & spa baths and pressed steel enamel.
Whatever the size of the job, you get the same one-year guarantee.

- Where
- Golborne (WA3, WN7, WN4)
- County
- Warrington
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Golborne questions
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can I have a bath again?
Generally the next day. We’ll tell you the exact curing time when we finish.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Warrington.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Common problems we fix in Golborne
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Contact us if you’ve noticed any of these:
- Chips caused by builders
- A hole punched through by something heavy
- Scuffs and scratches in the surface
- Rust by the waste and overflow
Comparing quotes
- Who turns up on the day
- Whether they match the colour on site
- What prep work is covered
- What happens if they find more damage
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Golborne clients choose us
- One price list for the whole UK
- We will tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
Read our pricing and bath cost comparison.
About Golborne
Golborne is about 5 miles north of Warrington, in Warrington. Anywhere in WA3, we come to you. Our technicians cover 72 places across Warrington. You can also see our page for Manchester, about 15 miles away.
All of WA3, WN7 and WN4 is within our area. You will find streets such as High Street, Chester Avenue and Ripon Avenue. Golborne sits on or near the A572 and A573, which makes travel easy. Nearby, we also work in Lowton (1 mile south-east), Lowton Heath (1 mile south-west), Town of Lowton (1 mile south-west), Crankwood (1 mile north) and Kenyon (2 miles south-east). We also work in nearby towns such as Warrington (5 miles south), Lymm (8 miles south-east), Fearnhead (4 miles south), Wilderspool (7 miles south), Orford (5 miles south) and Bruche (5 miles south). Golborne is one of the larger places we cover in Warrington.
What’s near Golborne
Our clients here include homes close to Pennington Flash Country Park, Rams Head pub and Church of St. Luke. Also close by are Golborne High School (0.6 miles north-west) and Lowton West Primary School (under half a mile west). For rail, the closest station is Newton-Le-Willows station, about 2.1 miles south-west of the centre. Nearby you will also find Lowton East (0.6 miles east) and Atherleigh Park Hospital (2.8 miles north-east). For a walk, there is Pennington Flash and Highfield Moss.
Landlord and trade work in Golborne
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What bath repair costs
Repairs from £95. We price every job individually. The main factors are:
- How hard the colour is to match
- How many areas need work
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A picture taken from further back
For a price in Golborne, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Looking after it afterwards
Once the work has cured, treat it gently:
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Store metal items away from the bath
- Don’t leave a fresh chip for long
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly before you book.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Also near Golborne
Also in Golborne
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.

