Warrington · England
Bath Repair for Kenyon homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Kenyon, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- Rusty patches near the plughole
Bath repair at your home in Kenyon
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you are dealing with hairline or through cracks in acrylic and chips under the taps, we can help, whatever the material.
You get a one-year guarantee, the same in Kenyon as everywhere else we work.
- Location
- Kenyon (WA3)
- Region
- Warrington
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Clean with warm water and a mild detergent
- Don’t leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Kenyon. The price comes down to:
- How many areas need work
- The type of damage
- Where the damage is and how we get to it
- Doing more than one item at once
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- The material, if you know it
- A picture taken from further back
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Landlord and trade work in Kenyon
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Warrington and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Our work in Kenyon
Kenyon is about 2 miles south-east of Golborne, in Warrington. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kenyon is one of 72 places in Warrington where we work. We work right across the region, from Kenyon to Manchester (14 miles away).
Every address in WA3 is within our area. From Kenyon Lane and Main Lane or a nearby road, we can come to you. Nearby, we also work in New Lane End (1 mile south), Little Town (1 mile south-east), Lowton (1 mile north-west), Diggle Green (1 mile north-east) and Wigshaw (1 mile south-east). We also work in nearby towns such as Warrington (4 miles south), Lymm (6 miles south-east), Fearnhead (3 miles south), Wilderspool (6 miles south), Orford (4 miles south) and Bruche (4 miles south).
Local landmarks in Kenyon
Around Kenyon, we work in homes near Lowton Church of England High School, St Lewis Catholic Primary School and Culcheth Linear Park and the streets around them. The closest station to Kenyon is Newton-Le-Willows station, about 2.2 miles west. Nearby you will also find Lowton East (1.1 miles north) and Winwick Hospital (2.6 miles south-west). Not far away are Highfield Moss and Pennington Flash.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep children and pets away from the room on the day
- Clear the area around the damage
- Keep a parking space free if you can
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Advice
Places near Kenyon
More services for Kenyon
Your questions about bath repair in Kenyon
What happens once I’ve sent pictures?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Which areas do you work in?
We work UK-wide, so Kenyon is covered. Our prices are the same everywhere.
When we would advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why book with us
- No need to remove anything
- Technicians who travel to you, UK-wide
- Normally one visit, start to finish
- Every repair guaranteed for a year
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
