Warrington · England

Bath Repair in Fearnhead

We travel to Fearnhead for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Fearnhead?

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Rinse the bath after use, especially in hard water areas
  • Store metal items away from the bath
  • Get any new chip repaired before it rusts

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

How we handle bath repair in Fearnhead

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are often asked to fix chips under the taps and cracks in an acrylic bath, across roll-top & freestanding, acrylic and cast iron enamel.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Fearnhead (WA2, WA1)
County
Warrington
Cover
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Our work in Fearnhead

Fearnhead is about 1 mile north-east of Warrington, in Warrington. Wherever you are in the WA2 postcode area, a technician comes to you. Fearnhead is one of 72 places in Warrington where we work. We work right across the region, from Fearnhead to Manchester (15 miles away).

We cover every part of the WA2 and WA1 postcode area. From Nook Lane, Mere Road and Crab Lane or anywhere nearby, a technician can come to you. You’ll find Fearnhead on the A574, so it’s easy for us to reach. Other places close to Fearnhead include Longbarn (1 mile east), Cinnamon Brow (1 mile north), Bruche (1 mile south), Padgate (1 mile south) and Orford (1 mile west). Larger places within reach include Golborne (4 miles north), Lymm (4 miles south-east), Wilderspool (3 miles south-west), Lowton (4 miles north), Culcheth (3 miles north-east) and Stockton Heath (3 miles south). Fearnhead is one of the larger places we cover in Warrington.

Local landmarks in Fearnhead

Around Fearnhead, we work in homes near The Millhouse pub, Christ Church CofE Primary School Padgate and King's Leadership Academy Warrington, among other places. You’ll also find Parkfields Park (under half a mile north), Padgate Academy (less than half a mile south-west) and Christ Church (under half a mile south). The closest station to Fearnhead is Padgate station, about 0.5 miles south. A little further out are Museum of The South Lancashire Regiment (pwv) (1.3 miles south-west) and Cockhedge Shopping Centre (2 miles south-west). For a walk, there is Paddington Meadows.

Map of Fearnhead © OpenStreetMap contributors

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Warrington and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Fearnhead: your questions answered

Do you come to Fearnhead?

Yes. We work across the UK and come to Fearnhead and the rest of Warrington. Send photos and we will quote, or call 0345 017 0787.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Will the repair show?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

When can I have a bath again?

Most baths can be used the day after. We confirm the time before we leave.

Can you quote from pictures?

Normally, yes. Clear photos let us give you a fixed price without visiting.

How it works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to care for it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Clear the area around the damage
  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Get a free quote

Related advice

Why repair rather than replace?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why us?

  • Honest advice, even when it means no job
  • Colour mixed on the day to match
  • One-year guarantee on every repair
  • Repair technicians who travel to you, UK-wide

Take a look at our prices page and guide to resurfacing and replacement costs.

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Honest limits

We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic

Prices and what affects them

Repairs from £95. Every quote is fixed and free. What we take into account:

  • How much damage there is
  • What kind of damage it is
  • How hard the colour is to match
  • Doing more than one item at once

The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

Send photos for a quote

Two or three clear pictures are generally enough. It helps if you send:

  • A close-up of the damage, in focus
  • Details of any past repairs
  • A photo taken from further back
  • A coin beside the damage so we can judge size

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.