Flintshire · England
Bath Repair for Gorsedd homes
Bath repair in and around Gorsedd: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- A kit repair that didn’t last
Keeping it looking good
Simple care helps the repair last. Our advice:
- A dripping tap stains enamel, so fix it early
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
There is nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
How we handle bath repair in Gorsedd
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We’re frequently asked to fix a hole punched through by something heavy and rusty patches near the plughole, across acrylic, pressed steel enamel and whirlpool & spa baths.
You get a one-year guarantee, the same in Gorsedd as everywhere else we work.
- Where
- Gorsedd (CH8)
- Area hub
- Flintshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Gorsedd
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Your questions about bath repair in Gorsedd
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you cover Gorsedd?
We do. We send a technician to Gorsedd for every job, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the next day.
Preparing for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
Upload a photo of the damage and a wider shot of the whole item, with your CH8 postcode, and we’ll come back with a fixed quote.
Advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- How much damage there is
- What kind of damage it is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- The material, if you know it
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Where we work around Gorsedd
Gorsedd is about 6 miles north-west of Flint, in Flintshire. Our repair technicians come to customers in Gorsedd, so you do not need to take anything anywhere. We work in all 139 towns and villages across Flintshire. We work right across the region, from Gorsedd to Liverpool (about 17 miles away).
We work across the CH8 postcode area and the streets around it. If you’re just outside Gorsedd, we cover Pantasaph (1 mile south-east), Lloc (1 mile west), Chwitffordd (1 mile north-west), Holway (1 mile east) and Carmel (1 mile east). Further out, we also cover Connah's Quay (10 miles south-east), Buckley (11 miles south-east), Bwcle (11 miles south-east), Flint (6 miles south-east), Mold (10 miles south-east) and Coppa View (11 miles south-east).
Around Gorsedd
Our clients here include homes close to St Paul's Church, Ysgol Bro Carmel and Ysgol Treffynnon and the streets around them. Further afield, we also cover the area around Coed Allt y Tywood Mound (0.6 miles north-west) and St Winefride's Well Museum (2 miles east). Green spaces nearby include Llyn Helyg and Pen-y-gelli.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Common problems we fix in Gorsedd
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for any of the following:
- Chips caused by builders
- A chip where the taps sit
- Rust spots around the plughole
- A kit repair that didn’t last
What your quote should include
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- How to look after the finish
- What happens if the damage is worse than the photos show
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
