Cumbria · England

Bath chip & crack repair in Grasmere, Cumbria

We travel to Grasmere for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Damage beneath the taps
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Grasmere homes

Bath repair in Grasmere without replacing anything

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for a chipped rim or side and chips under the taps, on whirlpool & spa baths, pressed steel enamel and acrylic.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.

Location
Grasmere (LA22)
Area hub
Cumbria
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Questions from Grasmere

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

How do I get a price for bath repair in Grasmere?

Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Will the repair show?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

What a repair can’t fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Leaking fittings, which need a plumber
  • Cracks in parts of an acrylic bath we cannot get to from below

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Grasmere

  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic

Covering Grasmere

Grasmere is about 15 miles north-west of Kendal, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Grasmere is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 66 miles away.

Here we cover the LA22 postcode area. Local streets include Broadgate Orchard, Broadgate and High Fieldside. With the B5287 close by, Grasmere is easy for our technicians to reach. If you are just outside Grasmere, we cover Chapel Stile (2 miles south-west), Little Loughrigg (3 miles south), Skelwith Bridge (3 miles south), Clappersgate (3 miles south-east) and Ambleside (3 miles south-east). Larger places within reach include Kendal (15 miles south-east), Keswick (11 miles north-west), Windermere (8 miles south-east), Bowness-on-Windermere (8 miles south-east), Chestnut Hill (10 miles north) and Kentrigg (14 miles south-east).

Local landmarks in Grasmere

Our clients here include homes close to St Oswald's Church, Grasmere CofE Primary School and The Travellers Rest pub and the streets around them. Well-known places in the area include Wray Castle (4.9 miles south-east) and Wordsworth Museum (0.7 miles south-east). Open spaces near Grasmere include Alcock Tarn and Baystones.

Map of Grasmere © OpenStreetMap contributors

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What bath repair costs

Repairs from £95. Every quote is fixed and free. What we take into account:

  • How many items we do on one visit
  • How many areas need work
  • The colour and finish to match
  • Previous DIY repairs that have to come out

We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

You can take the pictures on your phone. Just make sure we can see:

  • One sharp close-up of the damage
  • One picture of the whole bath
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Should you replace it?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.

Why Grasmere clients choose us

  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK

Read our prices page or guide to resurfacing and replacement costs.

Do you need bath repair in Grasmere?

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

You may need us if you’ve spotted any of these:

  • A hole punched through by something heavy
  • Scratches you can feel with a fingernail
  • A failed DIY repair that is discoloured or lifting
  • Chips under the taps

Comparing quotes

  • Whether the colour is mixed to match
  • How your room will be protected
  • Whether the price covers travel
  • How long it needs to cure

Choosing a repair company

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Protect the bath with a towel when doing jobs nearby
  • Clean with warm water and a mild detergent
  • Store metal items away from the bath
  • Make sure an acrylic bath is firm underfoot

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Open a window if you can
  • Mention if the room is upstairs or in a flat

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.