Wirral · England
Bath chip & crack repair in Newton, Wirral
Fixed-price bath repair in Newton and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Rust by the waste and overflow
- A hole punched through by something heavy
About our bath repair in Newton
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You won’t need a plumber or tiler, because nothing is disconnected. Our technicians work on roll-top & freestanding, pressed steel enamel and acrylic, and the jobs we see most are chips along the edge of the bath and rust by the waste and overflow.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Newton (CH48)
- Area hub
- Wirral
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Newton
Landlords, letting agents and housing providers in Newton use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
What bath repair costs
Prices start from £95. There’s no charge for travel to Newton. The price comes down to:
- How many areas need work
- Doing more than one item at once
- Any earlier repairs that need removing first
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- A coin beside the damage so we can judge size
- Where you are, by postcode
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Common questions in Newton
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How long before I can use the bath?
Typically the day after. We confirm the time before we leave.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Do you come to Newton?
We do. We send a technician to Newton for every job, with no extra charge for travel.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Signs you need bath repair in Newton
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
You may need us if you’ve spotted any of these:
- Cracks in an acrylic bath
- Rust spots around the plughole
- Chips caused by builders
- Damage beneath the taps
Before booking anyone
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- How soon you can use it again
- What the guarantee covers, and for how long
The process
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. It normally takes a morning or an afternoon, and we will tell you if anything changes.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
More services for Newton
Covering Newton
Newton is about 1 mile east of West Kirby, in Wirral. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 44 towns and villages across Wirral, from the larger towns to small villages. We work right across the region, from Newton to Liverpool (10 miles away).
Here we cover the CH48 postcode area. From Gorse Lane, Larton Road and Meadow Road or a nearby road, a technician can come to you. If you’re just outside Newton, we cover Larton (1 mile north-east), Frankby (1 mile east), West Kirby (1 mile west), Caldy (1 mile south) and Irby Hill (1 mile south-east). We also work in nearby towns such as Birkenhead (4 miles east), Wallasey (5 miles north-east), Bebington (7 miles east), Heswall (3 miles south-east), Moreton (3 miles north-east) and Bromborough (8 miles east).
Local landmarks in Newton
Around Newton, we work in homes near Black Horse Hill Junior School, Caldy Hill and Hilbre High School. Other local landmarks include The Ridger pub (less than half a mile north) and St Michael & All Angels (less than half a mile north-west). The nearest railway station is West Kirby station, about 1.3 miles west of the centre. Nearby you’ll also find Arrowe Park Hospital (2.3 miles east) and Leasowe Castle (3.7 miles north-east). For a walk, there’s Bidston Hill and West Kirby Marine Lake.
What we cannot put right
A repair isn’t right for every job, including:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Aftercare tips
Simple care helps the repair last. Our advice:
- Rinse the bath after use, especially in hard water areas
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Don’t leave a fresh chip for long
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
