Devon · England
Bath Repair for Halberton homes
Problem with your bath in Halberton? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
When to call us in Halberton
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- Chips along the edge of the bath
- A chip where the taps sit
- Deep scratches in acrylic
- Impact holes in acrylic
Comparing quotes
- If travel is included in the price
- How your room will be protected
- How changes to the job are handled
- How soon you can use it again
Bath repair at your home in Halberton
A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. Whether it’s rust spots around the plughole and a chip where the taps sit, we can help.
Every repair comes with a one-year guarantee, wherever you are in Devon.
- Area
- Halberton (EX16)
- Region
- Devon
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why Halberton clients choose us
- Most jobs done in one visit
- We leave the room as we found it
- Work done at your home or business
- No extra charge for your area
Read our pricing and bath cost comparison.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Where we work around Halberton
Halberton is about 3 miles east of Tiverton, in Devon. Jobs in Halberton are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Halberton is one of 586 places in Devon where we work.
We cover every part of the EX16 postcode area. Local streets include High Street, Corner Lane and Chuch Path. If you are just outside Halberton, we cover Uplowman (2 miles north), Chevithorne (2 miles north-west), Tiverton (3 miles west), Bolham (4 miles west) and Hayne (4 miles north-west). We also work in nearby towns such as Exeter (13 miles south), Honiton (12 miles south-east), St Thomas (14 miles south-west), Larkbeare (14 miles south), Polsloe (13 miles south) and Cullompton (4 miles south).
Landmarks near Halberton
We visit homes around Halberton Primary School, Parish Church of St Andrew and Hickory Inn. The closest station to Halberton is Tiverton Parkway station, about 2.5 miles east. Further afield, we also cover the area around Belmont Hospital (2.9 miles west) and Tiverton Castle (3.2 miles west).
Also in Halberton
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Halberton
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Landlord and trade work in Halberton
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Halberton use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
FAQs for Halberton
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens next?
You’ll get a fixed quote back, normally with dates to choose from. You are under no obligation.
Is a holed acrylic bath repairable?
Normally. Send us a picture of the hole and one from under the bath if you can.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How to look after the repair
To keep it looking its best:
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How we price bath repair
Repairs from £95. There is no charge for travel to Halberton. The price comes down to:
- Doing more than one item at once
- How much damage there is
- Any earlier repairs that need removing first
- Unusual colours or finishes
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- What it’s made of, if you know
- Something in shot to show the size
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
