Moray · Scotland
Bath chip & crack repair in Hallowood, Moray
Local bath repair for Hallowood: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Chips under the taps
Bath repair in Hallowood, done in place
Most of our bath repairs take a few hours, and you can typically bathe again the following day. There’s no need to book a plumber or tiler, because the bath does not move. Typical jobs include an old repair that has yellowed or come loose and hairline or through cracks in acrylic, on roll-top & freestanding, cast iron enamel and pressed steel enamel.
All of our repairs are guaranteed for twelve months in Hallowood and everywhere else. We return to put right any problem with the work.
- Location
- Hallowood (IV30)
- County
- Moray
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
How we price bath repair
Prices start from £95. We charge the same across the UK, including Hallowood. What changes the price is:
- The material
- The type of damage
- How many areas need work
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Two or three clear pictures are typically enough. It helps if you send:
- Details of any past repairs
- A wider photo showing the whole bath
- Any details about the material
- A coin or ruler next to the damage for scale
Most customers in Hallowood get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Your questions about bath repair in Hallowood
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your IV30 postcode.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Which areas do you work in?
We cover the entire UK, including Hallowood and the rest of Moray. Just include your postcode and we will confirm dates.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so mention it when you send pictures.
Where we work around Hallowood
Hallowood is about 2 miles south-east of Elgin, in Moray. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 58 towns and villages in Moray, from the larger towns to small villages.
All of IV30 is covered. We also cover the places around Hallowood: Longmorn (2 miles south-west), Ashgrove (2 miles north-west), Lhanbryde (2 miles east), Elgin (2 miles north-west) and Fogwatt (2 miles south). We also work in nearby towns such as Buckie (11 miles east), Forres (13 miles west), Lossiemouth (6 miles north), Keith (13 miles south-east), Burghead (10 miles north-west) and Fochabers (6 miles east). If you are somewhere remote, ring us first and we’ll plan the trip.
Landmarks near Hallowood
Typical jobs here are in homes near Elgin High School and St Andrews-Lhanbryd Parish Church and the streets around them. The nearest railway station is Elgin station, about 2 miles north-west of the centre. Well-known places in the area include Elgin Castle (2.6 miles north-west) and Dr Gray's Hospital (2.7 miles north-west). Open spaces near Hallowood include Loch Spynie and Findlay's Seat.
Repair or replace in Hallowood?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. We charge the same wherever you are, so there is no premium for Hallowood. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Hallowood
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
Read our prices page and bath cost comparison.
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes two to three hours for most chips.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Ask for a price
Send us a photo of the damage and one of the whole item, with your IV30 postcode, and we’ll come back with a fixed quote.
Advice
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
When to call us in Hallowood
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The things clients usually mention when they call are:
- Chips on the rim or sides
- A chip where the taps sit
- A kit repair that didn’t last
- Rusty patches near the plughole
What your quote should include
- Who turns up on the day
- When it can be used again
- How the room is protected while they work
- How the colour is matched
Also in Hallowood
About our accreditations · Every repair comes with a one-year guarantee.
