Moray · Scotland
Bath Repair in Fogwatt
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Fogwatt, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- A failed DIY repair that’s discoloured or lifting
Questions from Fogwatt
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
How long does the repair take to cure?
Typically the next day. We confirm the time before we leave.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What happens after I send photos?
You’ll get a fixed quote back, generally with dates to choose from. You’re under no obligation.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
How we handle bath repair in Fogwatt
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. Whether it’s holes from dropped items and scratches you can feel with a fingernail, we can help, on whirlpool & spa baths, pressed steel enamel and cast iron enamel alike.
A one-year guarantee comes as standard.
- Area
- Fogwatt (IV30)
- Area hub
- Moray
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Fogwatt
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Get in touch if you’ve noticed:
- Rusty patches near the plughole
- A chip where the taps sit
- Holes from dropped items
- A kit repair that didn’t last
Questions to ask before booking
- Who will actually do the work
- Whether the colour is mixed to match
- What happens if they find more damage
- Aftercare advice
Where we work around Fogwatt
Fogwatt is about 4 miles south of Elgin, in Moray. Jobs in Fogwatt are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in 58 places across Moray.
Our technicians cover all of the IV30 postcode area and the streets around it. Streets in the area include Bracany Gardens and Bracany Park, and we cover them all. Neighbouring places we cover include Longmorn (1 mile north), Thomshill (1 mile west), Hallowood (2 miles north), Ashgrove (3 miles north) and Blackhills (3 miles north-east). Larger places within reach include Buckie (13 miles north-east), Forres (13 miles west), Lossiemouth (8 miles north), Keith (13 miles east), Burghead (10 miles north-west) and Fochabers (7 miles east). For island and remote addresses, call first so we can plan the visit.
Local landmarks in Fogwatt
Fogwatt’s nearest station is Elgin station, about 3.4 miles north of the centre. Other landmarks nearby include St Giles Centre (3.8 miles north) and Elgin Museum (3.7 miles north). Not far away are Findlay's Seat.
How we price bath repair
Prices start from £95. There is no area surcharge for Fogwatt. What changes the price is:
- Any earlier repairs that need removing first
- The material and finish
- The size and number of damaged areas
- The type of damage
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from photos
Two or three clear pictures are typically enough. Try to include:
- A close-up of the damage, in focus
- Natural light rather than flash
- The material, if you know it
- A picture taken from further back
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlords, agents and businesses in Fogwatt
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Moray and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Have a window or extractor fan available
- Clear the area around the damage
- Point us to the nearest place to park
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Read more
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When we’d advise against a repair
It helps to know what we can’t do:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What else we do in Fogwatt
Repairing versus replacing in Fogwatt
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Colour mixed on the day to match
- Same prices wherever you are
- Every repair guaranteed for a year
- Nothing taken out or refitted
Read our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
