Hampshire · England

Bath Repair for Hangersley homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Hangersley. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Hangersley

Aftercare tips

Looking after the surface is easy:

  • Stick to mild cleaners and a soft cloth
  • Fix dripping taps early to stop staining and limescale
  • Do not scrub with anything abrasive
  • If an acrylic bath flexes, have its feet adjusted

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

How we handle bath repair in Hangersley

Most of our bath repairs take a few hours, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because the bath does not move. If you are dealing with a failed DIY repair that’s discoloured or lifting and a chip where the taps sit, we can normally put it right, on whirlpool & spa baths, acrylic and cast iron enamel alike.

Every repair is covered by our one-year guarantee, wherever you are in Hampshire.

Location
Hangersley (BH24)
Region
Hampshire
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

The process

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Advice

Hangersley questions

Will the repair show?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

How long before I can use the bath?

Typically within a day, depending on the repair.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. If there is more, we will tell you before starting.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Repair or replace: which is better?

Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy
  • Colour mixed on the day to match
  • Work done at your home or business

Take a look at our full price list or resurfacing vs replacement cost guide.

Where we work around Hangersley

Hangersley is about 5 miles east of Verwood, in Hampshire. Anywhere in BH24, we carry out the work at your property. We cover 683 places in Hampshire, from the larger towns to small villages.

Every address in BH24 is within our area, from the main roads to the quietest streets. That includes homes on St Aubyns Lane and Cowpitts Lane and the roads around them. Close by, we cover Shobley (1 mile east), Highwood (1 mile north), Forest Corner (1 mile south-east), Foulford (1 mile south-east) and Poulner (1 mile south-west). Within a short drive, we also cover Totton (12 miles east), Lymington (11 miles south-east), Romsey (15 miles north-east), Hythe (15 miles east), New Milton (8 miles south-east) and Barton on Sea (9 miles south-east).

Local landmarks in Hangersley

Typical jobs here are in homes near Poulner Infant School, Ringwood School Academy and The London Tavern, among other places. A little further out are St Leonard's Hospital (5.4 miles south-west). For a walk, there’s Linbrook Lake and Blashford Lakes.

Map of Hangersley © OpenStreetMap contributors

Landlord and trade work in Hangersley

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

When a repair is not the answer

A repair isn’t always the answer, and we would rather say so up front. We can’t fix:

  • Leaking fittings, which need a plumber
  • A bath that moves underfoot, until its support is fixed
  • Cracks in parts of an acrylic bath we cannot get to from below

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

Prices and what affects them

Repairs from £95. You will know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • Whether we combine several jobs
  • Where the damage is and how we get to it

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from pictures

Phone photos are fine. Just make sure we can see:

  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Natural light rather than flash
  • A clear, close picture of the problem area

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.