Hampshire · England
Bath Repair in Poulner
Bath repair in Poulner without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- A cracked acrylic bath
- A chipped rim or side
When to call us in Poulner
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Get in touch if you’ve noticed any of these:
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
- Damage beneath the taps
What your quote should include
- Whether cleaning and preparation are in the price
- How the colour is matched
- What the guarantee covers, and for how long
- If travel is included in the price
Bath repair in Poulner without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. If you’re dealing with chips caused by builders and a hole punched through by something heavy, we can help, on roll-top & freestanding, pressed steel enamel and acrylic alike.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Area
- Poulner (BH24)
- Area hub
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
Poulner: your questions answered
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
What affects the price in Poulner
Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:
- What kind of damage it is
- How easy the damage is to reach
- How many areas need work
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Your postcode, so we can check dates
- Natural light rather than flash
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Repair or replace in Poulner?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- No need to remove anything
See our prices page or guide to resurfacing and replacement costs.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before booking.
Materials we work on in Poulner
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Covering Poulner
Poulner is about 1 mile north-east of Ringwood, in Hampshire. Jobs in Poulner are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages.
Postcode districts we cover here: BH24. Streets in the area include Oak Lane, Link Road and Croft Road, all of which we cover. We also cover the places around Poulner: Ringwood (1 mile south-west), Hightown (1 mile south), Hangersley (1 mile north-east), Blashford (1 mile north-west) and Forest Corner (1 mile east). Further out, we also cover Totton (12 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Marchwood (14 miles east) and Ashley (8 miles south-east).
What’s near Poulner
In Poulner, that means homes near St John the Baptist, White Hart Public House and Poulner Infant School and the streets around them. Well-known places in the area include St Leonard's Hospital (4.4 miles south-west). Open spaces near Poulner include Linbrook Lake and Blashford Lakes.
Also near Poulner
What else we do in Poulner
Landlords, agents and businesses in Poulner
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
