Pembrokeshire · Wales
Bath Repair for Hasguard homes
Fixed-price bath repair in Hasguard and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips under the taps
Bath repair in Hasguard without replacing anything
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. We regularly repair pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most often call us about a cracked acrylic bath and chips caused by builders.
Big or small, it’s backed by a one-year guarantee in Hasguard and across Pembrokeshire.
- Location
- Hasguard (SA62)
- County
- Pembrokeshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Hasguard and the surrounding area
Hasguard is about 4 miles north-west of Milford Haven, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Hasguard is one of 223 towns and villages in Pembrokeshire where we work.
We work across SA62 and the streets around it. Neighbouring places we cover include Hasguard Cross (1 mile north), St Ishmael's (2 miles south-west), Little Haven (2 miles north), Walton West (2 miles north) and Broad Haven (3 miles north). Larger places within reach include Haverfordwest (7 miles north-east), Milford Haven (4 miles south-east), Pembroke (10 miles south-east), Pembroke Dock (8 miles south-east), The Marsh (7 miles north-east) and Green (9 miles south-east).
Landmarks near Hasguard
Around Hasguard, we work in homes near Church of Saint Peter and the streets around them. The closest station to Hasguard is Milford Haven station, roughly 3.5 miles south-east of the centre. Well-known places in the area include Capeston Rath (0.9 miles east). For a walk, there is Hubberstown Pill and Borough Head.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Aftercare tips
So the finish stays in good condition for years:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
FAQs for Hasguard
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Are there extra charges for Hasguard?
No. Our quotes include travel, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Pembrokeshire.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you come to Hasguard?
Yes. We cover the whole UK and come to Hasguard. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Common problems we fix in Hasguard
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
People usually call us when they notice something like this:
- Damage done while the bathroom was being fitted
- Chips under the taps
- Chips on the rim or sides
- A cracked acrylic bath
What your quote should include
- How the room is protected while they work
- When it can be used again
- How to care for the finish
- What happens if the damage is worse than the photos show
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Nearby places to Hasguard
Also in Hasguard
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. Usually it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Hasguard. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Hasguard clients choose us
- Colour-matched on site
- A year’s guarantee on all work
- Typically one visit, start to finish
- CHAS and Constructionline accredited
Take a look at our pricing or bath cost comparison.
What bath repair costs
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How many areas need work
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- One picture of the entire bath
- One sharp close-up of the damage
To get a price, send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
