Pembrokeshire · Wales
Bath chip & crack repair in Townsend, Pembrokeshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Townsend, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips caused by builders
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- One price list for the entire UK
- Dust sheets down, tidy finish
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
Take a look at our pricing and resurfacing vs replacement cost guide.
About our bath repair in Townsend
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Whether it’s damage done while the bathroom was being fitted and a kit repair that didn’t last, we can help, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Townsend (SA62)
- County
- Pembrokeshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We agree an arrival time beforehand. Once we are there, the work takes a few hours. The room is left tidy and ready to use once it has cured.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- The material and finish
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
For a price in Townsend, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When to call us in Townsend
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
People normally call us after spotting one of these:
- Rust by the waste and overflow
- Snagging damage from a refit
- A chipped rim or side
- Holes from dropped items
What to look for in a quote
- What prep work is covered
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly.
What we work on
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Common questions in Townsend
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Something went through my bath. Can it be fixed?
Typically. Photos of the hole and the underside help us check.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Do you cover the whole of Pembrokeshire?
We cover the whole UK, including Townsend and the rest of Pembrokeshire. Send your postcode with your pictures and we’ll offer you dates.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Places near Townsend
More services for Townsend
Townsend and nearby
Townsend is about 6 miles west of Milford Haven, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Townsend is one of 223 towns and villages in Pembrokeshire we cover.
Our visits in SA62 are booked in the same way as anywhere else. Close by, we cover Dale (1 mile south-west), St Ishmael's (2 miles north-east), Marloes (2 miles north-west), Hasguard (3 miles north-east) and Hasguard Cross (4 miles north-east). We also work in nearby towns such as Haverfordwest (11 miles north-east), Milford Haven (6 miles east), Pembroke (11 miles east), Pembroke Dock (10 miles east), The Marsh (11 miles north-east) and Green (11 miles east).
Around Townsend
We visit homes around Church of Saint James the Great and The Griffin Inn, among other places. Well-known places in the area include Dale Castle (0.5 miles west). Open spaces near Townsend include Brunt Farm Hill.
About our accreditations · Every repair comes with a one-year guarantee.
