Aberdeen · Scotland
Bath Repair in Hatton of Fintray
Bath repair for Hatton of Fintray, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Scuffs and scratches in the surface
- A failed DIY repair that is discoloured or lifting
Questions from Hatton of Fintray
Do you cover the entire of Aberdeen?
Everywhere in the UK, Hatton of Fintray included. Travel is included in the price.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Will the price change on the day?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you repair something that’s been repaired before?
Typically, yes. We remove the old repair before doing a new one.
Bath repair at your home in Hatton of Fintray
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people contact us are scratches you can feel with a fingernail and damage beneath the taps.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Hatton of Fintray (AB21)
- Region
- Aberdeen
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Hatton of Fintray
Hatton of Fintray is about 6 miles south-east of Inverurie, in Aberdeen. From the centre of Hatton of Fintray to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Hatton of Fintray is one of 63 places in Aberdeen we cover.
Jobs in AB21 work the same way as everywhere else we cover. That includes homes on Station Road, Hatton Court and Lairds Park. We also cover the places around Hatton of Fintray: Mill of Fintray (1 mile west), Blackburn (2 miles south), Kinmuck (3 miles north-west), Kinellar (3 miles south-west) and Kinmundy (3 miles east). We also work in nearby towns such as Aberdeen (8 miles south-east), Rosemount (8 miles south-east), Berryden (8 miles south-east), Ferryhill (9 miles south-east), New Aberdeen (9 miles south-east) and Dyce (4 miles south-east).
Landmarks near Hatton of Fintray
We visit homes around Old Parish Church. Hatton of Fintray’s nearest station is Kintore station, about 3.2 miles west of the centre. Nearby you will also find Kingseat Hospital (4.4 miles north-east) and Hallforest Castle (3.9 miles west). Green spaces nearby include Temple Hill.
How we price bath repair
Prices start from £95. There’s no charge for travel to Hatton of Fintray. The price depends on:
- The material
- How easy the damage is to reach
- How much damage there is
- The colour and finish to match
Our prices are the same across the UK, with no extra for Hatton of Fintray. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
Most quotes are done from photos alone. To help us price it:
- One picture of the whole bath
- The postcode, so we can plan the visit
- Something in shot to show the size
- Daylight if possible, and no flash reflection
Email us a picture of the damage and one of the entire item, with your AB21 postcode, and we’ll reply with a fixed quote.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Clean with warm water and a mild detergent
- Make sure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What a repair cannot fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly before booking.
Materials we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
What you get with us
- Repair technicians who travel to you, UK-wide
- Usually one visit, start to finish
- Colour-matched on site
- One-year guarantee on every repair
See our pricing or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
More services for Hatton of Fintray
What we’re called out for in Hatton of Fintray
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- Chips on the rim or sides
- Snagging damage from a refit
- A cracked acrylic bath
- An old repair that has yellowed or come loose
What your quote should include
- How changes to the job are handled
- How the room is protected while they work
- How to look after the finish
- The length of the guarantee and what it covers
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the following day, the bath is ready to use.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
