Aberdeen · Scotland
Bath Repair in Mill of Fintray
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Mill of Fintray, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Damage done while the bathroom was being fitted
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
For anyone letting property in or around Mill of Fintray, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Bath repair at your home in Mill of Fintray
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include a chip where the taps sit and a failed DIY repair that’s discoloured or lifting, on acrylic, pressed steel enamel and whirlpool & spa baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Mill of Fintray (AB21)
- County
- Aberdeen
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Mill of Fintray
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
It’s worth getting a quote if you see:
- Chips caused by builders
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
- Rusty patches near the plughole
Before you book anyone
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
Keeping it looking good
Simple care helps the repair last. We recommend:
- Stick to mild cleaners and a soft cloth
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you’re working above it
- Keep abrasive pads and gritty cleaners away from the bath
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- A year’s guarantee on all work
- One price list for the whole UK
- Most jobs done in one visit
- CHAS and Constructionline accredited
Read our full price list or bath cost comparison.
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Point us to the nearest place to park
Get a quote
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
What else we do in Mill of Fintray
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
FAQs for Mill of Fintray
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your AB21 postcode.
What we can’t put right
Before booking, it’s worth knowing the limits:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. What matters most is:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The size and number of damaged areas
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what helps:
- The material, if you know it
- The postcode, so we can plan the visit
- Something in shot to show the size
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Where we work around Mill of Fintray
Mill of Fintray is about 5 miles south-east of Inverurie, in Aberdeen. We travel to clients in Mill of Fintray and the surrounding area, so you don’t need to take anything anywhere. We work in all 63 towns and villages across Aberdeen.
Here we cover the AB21 postcode area. Neighbouring places we cover include Hatton of Fintray (1 mile east), Blackburn (2 miles south), Kinmuck (2 miles north-west), Kinellar (3 miles south-west) and Kintore (3 miles west). Further out, we also cover Aberdeen (8 miles south-east), Rosemount (9 miles south-east), Berryden (8 miles south-east), Ferryhill (10 miles south-east), New Aberdeen (9 miles south-east) and Dyce (4 miles south-east).
Around Mill of Fintray
Around Mill of Fintray, we work in homes near Fintray Parish Church, among other places. For rail, the closest station is Kintore station, roughly 2.8 miles west of the centre. Further afield, we also cover the area around Hallforest Castle (3.6 miles west) and Inverurie Hospital (4.6 miles north-west). Open spaces near Mill of Fintray include Temple Hill.
About our accreditations · Every repair comes with a one-year guarantee.
