North Yorkshire · England
Bath Repair in Hawnby
Bath repair in and around Hawnby: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Damage beneath the taps
- Scuffs and scratches in the surface
Bath repair at your home in Hawnby
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because the bath doesn’t move. Common call-outs are for chips on the rim or sides and rust by the waste and overflow, across acrylic, roll-top & freestanding and cast iron enamel.
All our work comes with our one-year guarantee.
- Where
- Hawnby (YO62)
- County
- North Yorkshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. You will not pay by the hour. The price depends on:
- Access to the area
- How many items we do on one visit
- How much damage there is
- The material and finish
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- The material, if you know it
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Places near Hawnby
What else we do in Hawnby
Honest limits
In fairness, there are a few things a repair won’t fix:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Hawnby
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Do you need bath repair in Hawnby?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
People normally call us after spotting something like this:
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
Questions to ask before booking
- Who turns up on the day
- How the room is protected while they work
- How long it needs to cure
- If travel is included in the price
Hawnby and the surrounding area
Hawnby is about 11 miles east of Northallerton, in North Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 626 places across North Yorkshire, from the larger towns to small villages. Our jobs stretch from Hawnby to Leeds (37 miles away).
We work across the YO62 postcode area and the streets around it. Neighbouring places we cover include Laskill (1 mile north-east), Rievaulx (3 miles south-east), Kirby Knowle (5 miles west), Thirlby (5 miles south-west) and Helmsley (6 miles south-east). Within a short drive, we also cover Northallerton (11 miles west), Thirsk (8 miles south-west), Easingwold (12 miles south), Stokesley (12 miles north), Sowerby (9 miles south-west) and Kirkbymoorside (10 miles east).
Landmarks near Hawnby
Typical jobs here are in homes near Church of All Saints, among other places. A little further out are Bumper Castle (2 miles north). The countryside around Hawnby includes Sutton Bank and Gormire Lake.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why us?
- We leave the room as we found it
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list and bath cost comparison.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, tidy-up included.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Make sure the area is dry
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Related advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Put a towel in the bath if you are working above it
- Check that an acrylic bath does not move when you stand in it
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Common questions in Hawnby
How much does bath repair cost in Hawnby?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you work in Hawnby?
Yes, we do. We send a technician to Hawnby for every job, and the price is the same as everywhere else.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
