North Yorkshire · England
Bath Repair for Stokesley homes
Bath repair in Stokesley without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips caused by builders
Do you need bath repair in Stokesley?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for any of the following:
- Cracks in an acrylic bath
- Chips caused by builders
- Damage beneath the taps
- Impact holes in acrylic
What your quote should include
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- What prep work is covered
Bath repair in Stokesley without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Typical jobs include rust spots around the plughole and a kit repair that didn’t last, across acrylic, pressed steel enamel and roll-top & freestanding.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Stokesley (TS9)
- County
- North Yorkshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Stokesley
Also in Stokesley
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Put a towel in the bath if you’re working above it
- Rinse the bath after use, especially in hard water areas
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Stokesley and nearby
Stokesley is about 6 miles south of Middlesbrough, in North Yorkshire. Customers in Stokesley get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Stokesley is one of 626 towns and villages in North Yorkshire we cover. Our nearest city page is Newcastle upon Tyne, about 40 miles away.
All of TS9 is within our area, from the main roads to the quietest streets. That includes homes on College Square, High Street and Station Road and the roads around them. Nearby, we also work in Kirkby (2 miles south-east), Great Busby (2 miles south), Great Broughton (2 miles south-east), Great Ayton (3 miles north-east) and Little Ayton (3 miles east). Further out, we also cover Northallerton (13 miles south-west), Romanby (14 miles south-west) and Brompton (12 miles south-west).
Local landmarks in Stokesley
We visit homes around The Spread Eagle Public House, Stokesley School and Stokesley Primary Academy, among other places. For rail, the closest station is Great Ayton station, roughly 3.3 miles east of the centre. Nearby you will also find Castle Hill (less than half a mile south-east) and Captain Cook's Schoolroom (2.6 miles north-east). Open spaces near Stokesley include Cringle Moor.
Common questions in Stokesley
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and you will get one combined price.
Are there extra charges for Stokesley?
No. Our quotes include travel, and we charge the same wherever you are.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you cover Stokesley?
Yes. We work across the UK and travel to Stokesley. Send us photos for a fixed quote, or call 0345 017 0787.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What bath repair costs
Repairs from £95. You’ll know the full cost before booking. We take into account:
- Unusual colours or finishes
- The type of damage
- Access to the area
- The material and finish
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- The material, if you know it
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Any earlier repairs or coatings
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
The process
We work cleanly and quietly. Protection goes down first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
- Let the surface dry out before the visit
Getting a price
Most clients in Stokesley get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Repairing versus replacing in Stokesley
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Nothing taken out or refitted
- Same prices wherever you are
- Usually one visit, start to finish
- Honest advice, even when it means no job
Read our prices page and guide to resurfacing and replacement costs.
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we will say what we think.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
