Derbyshire · England
Bath chip & crack repair in Heath, Derbyshire
Damaged bath in Heath? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Rust by the waste and overflow
Bath repair in Heath, done in place
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We are frequently asked to fix a cracked acrylic bath and chips along the edge of the bath, across roll-top & freestanding, acrylic and whirlpool & spa baths.
Every repair is covered by our one-year guarantee, wherever you are in Derbyshire.
- Where
- Heath (S44)
- Area hub
- Derbyshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Heath?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Technicians who travel to you, UK-wide
- No extra charge for your area
- Everything repaired in place
- Rooms protected and left tidy
Take a look at our full price list and guide to resurfacing and replacement costs.
Covering Heath
Heath is about 3 miles south-west of Bolsover, in Derbyshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 532 towns and villages in Derbyshire, from the larger towns to small villages. Our jobs stretch from Heath to Manchester (about 41 miles away).
Our visits in S44 are booked in the same way as anywhere else. Streets in the area include Slack Lane, Moorland Drive and Heather Avenue. We also travel to Holmewood (1 mile south-west), Stainsby (1 mile south-east), Doe Lea (2 miles east), Ault Hucknall (2 miles south-east) and Grassmoor (2 miles west). We also work in nearby towns such as Chesterfield (5 miles north-west), Ilkeston (15 miles south), Belper (13 miles south-west), Heanor (12 miles south), Dronfield (9 miles north-west) and Ripley (11 miles south).
Near you in Heath
We visit homes around The Elm Tree pub, Church of All Saints and Heath Primary School, among other places. The nearest railway station is Chesterfield station, roughly 4.3 miles north-west. Well-known places in the area include Bolsover Castle (3.1 miles north-east) and Clay Cross Hospital (3.2 miles south-west).
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to Heath. The price comes down to:
- The size and number of damaged areas
- The material
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- What it’s made of, if you know
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A wider photo showing the entire bath
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Heath use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Towns and villages near Heath
What else we do in Heath
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Common problems we fix in Heath
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Typical reasons for a call-out include:
- A chip where the taps sit
- Rust spots around the plughole
- Cracks in an acrylic bath
- Holes from dropped items
What your quote should include
- Whether they match the colour on site
- Whether a trained technician does the job
- What happens if they find more damage
- What preparation is included
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a few hours, depending on the damage, including clearing up.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the day after, the bath is ready to use.
How to prepare
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Keep a parking space free if you can
Getting a price
Most clients in Heath get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
Send us pictures and we’ll tell you honestly.
Materials we work on in Heath
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
FAQs for Heath
How do I get a price for bath repair in Heath?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Which areas do you work in?
Across the UK, so Heath is covered. Prices don’t change with location.
Do you work in Heath?
We do. Technicians travel to Heath from across the region, and the price is the same as everywhere else.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
