Conwy · Wales
Bath chip & crack repair in Henryd, Conwy
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Henryd. Send photos for a free, fixed quote.
- Repairs from £95
- A hole punched through by something heavy
- A cracked acrylic bath
About our bath repair in Henryd
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. If you’re dealing with an old repair that has yellowed or come loose and a hole punched through by something heavy, we can help, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Henryd (LL32)
- Region
- Conwy
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What bath repair costs
Repairs from £95. We charge the same across the UK, including Henryd. What changes the price is:
- Any earlier repairs that need removing first
- What kind of damage it is
- Access to the area
- How hard the colour is to match
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your photos
You can take the photos on your phone. Make sure they show:
- One sharp close-up of the damage
- Where you are, by postcode
- The material, if you know it
- Natural light rather than flash
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Henryd and the surrounding area
Henryd is about 4 miles south of Llandudno, in Conwy. Jobs in Henryd are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Henryd is one of 75 towns and villages in Conwy we cover. We work right across the region, from Henryd to Liverpool (about 39 miles away).
Postcode districts we cover here: LL32. Local streets include Maes Baclaw and Erw Fawr, and we cover them all. We also cover the places around Henryd: Groesffordd (1 mile north-west), Hendre (1 mile north), Gyffin (1 mile north), Cadnant Park (2 miles north) and Ty'n-y-groes (2 miles south). Larger places within reach include Bae Colwyn (5 miles north-east), Llandudno (4 miles north), Old Colwyn (6 miles north-east), Colwyn Bay (6 miles east), Abergele (10 miles east) and Colwyn Bay (5 miles north-east).
Near you in Henryd
Our clients here include homes close to Llangelynin New Church, The Groes Inn and Ysgol Aberconwy. The nearest railway station is Conwy station, roughly 1.6 miles north of the centre. A little further out are Toll House (1.7 miles north) and Conwy Castle (1.7 miles north). For a walk, there is Llyn Pen Ffridd Newydd and Gorse Hill.
- Local facilities include Marl (2.5 miles north-east)
Common problems we fix in Henryd
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Keep an eye out for any of the following:
- Rust by the waste and overflow
- Chips under the taps
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
What to look for in a quote
- Aftercare advice
- How the room is protected while they work
- What prep work is covered
- If travel is included in the price
Common questions in Henryd
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Landlord and trade work in Henryd
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Colour-matched on site
- Honest advice, even when it means no job
- We leave the room as we found it
- Fixed prices from your pictures
Read our prices page and resurfacing vs replacement cost guide.
Places near Henryd
Other services in Henryd
How the visit works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It generally takes two to three hours for most chips, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
