Pembrokeshire · Wales
Bath Repair for Hermon homes
Bath repair across Hermon and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Damage beneath the taps
When to call us in Hermon
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.
It’s worth getting a quote if you see:
- A chipped rim or side
- A hole punched through by something heavy
- Damage beneath the taps
- Rust spots around the plughole
What to look for in a quote
- How soon you can use it again
- If travel is included in the price
- Whether a trained technician does the job
- How to care for the finish
About our bath repair in Hermon
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you are dealing with chips caused by builders and scuffs and scratches in the surface, we can normally put it right, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Hermon (SA36)
- County
- Pembrokeshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Hermon
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
How to get a price
To get a price, send two or three photos using our quote form or ring us. We will say right away whether it can be repaired.
Read more
What bath repair costs
Prices start from £95. We charge the same across the UK, including Hermon. The price reflects:
- Access to the area
- Unusual colours or finishes
- How much damage there is
- The material
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- Natural light rather than flash
- What it’s made of, if you know
- A wider photo showing the entire bath
Most clients in Hermon get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Covering Hermon
Hermon is about 15 miles north-west of Carmarthen, in Pembrokeshire. Anywhere in SA36, we carry out the work at your property. Hermon is one of 223 towns and villages in Pembrokeshire we cover.
Our technicians cover all of the SA36 postcode area. Nearby, we also work in Crymych (2 miles north-west), Blaenffos (3 miles north), Capel Colman (4 miles north), Boncath (4 miles north) and Trelech (5 miles east). Within a short drive, we also cover Fishguard and Goodwick (15 miles west), Narberth (12 miles south-west), Narberth Bridge (12 miles south-west), Newport (10 miles north-west) and Lower Town (15 miles west).
Around Hermon
Around Hermon, we work in homes near Church of St Brynach and Lamb Inn and the streets around them. Further afield, we also cover the area around Llanfyrnach Motte (1 mile east). Not far away are Bryn-eithin.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
What you get with us
- Honest advice, even when it means no job
- One visit for most repairs
- We leave the room as we found it
- Colour mixed on the day to match
Read our prices page or bath cost comparison.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Towns and villages near Hermon
More services for Hermon
Landlords, agents and businesses in Hermon
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
