Pembrokeshire · Wales
Bath Re-enamelling in Hermon
Local bath re-enamelling for Hermon: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our bath re-enamelling in Hermon
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s a coating lifting around the plughole and a bath in a colour that no longer suits, we can help, on pressed steel baths, Victorian roll-tops and basins & shower trays alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Hermon (SA36)
- Area hub
- Pembrokeshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price depends on:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A photo taken from further back
For a price in Hermon, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also near Hermon
Other services in Hermon
Common questions in Hermon
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you come to Hermon?
We do. Technicians travel to Hermon from across the region, with no extra charge for travel.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Hermon and nearby
Hermon is about 15 miles north-west of Carmarthen, in Pembrokeshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Hermon is one of 223 towns and villages in Pembrokeshire where we work.
Jobs in SA36 are booked in the same way as anywhere else. Other places close to Hermon include Crymych (2 miles north-west), Blaenffos (3 miles north), Capel Colman (4 miles north), Boncath (4 miles north) and Trelech (5 miles east). Within a short drive, we also cover Fishguard and Goodwick (15 miles west), Narberth (12 miles south-west), Narberth Bridge (12 miles south-west), Newport (10 miles north-west) and Lower Town (15 miles west).
What’s near Hermon
Locally, our jobs take us to homes close to Church of St Brynach and Lamb Inn, among other places. A little further out are Llanfyrnach Motte (1 mile east). The countryside around Hermon includes Bryn-eithin.
Common problems we fix in Hermon
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
- An outdated colour you’d like to change
What your quote should include
- When it can be used again
- Whether they match the colour on site
- How the room is protected while they work
- Whether there are any call-out or travel charges
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Prices start from £350. Our prices are the same across the UK, with no extra for Hermon. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Usually one visit, start to finish
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Straight answers about what a repair can do
Read our prices page and guide to resurfacing and replacement costs.
Aftercare tips
Simple care helps the repair last. We recommend:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
