Stockport · England

Bath chip & crack repair in High Lane, Stockport

Bath repair for High Lane, without a refit. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • Cracks in an acrylic bath
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in High Lane

Bath repair in High Lane, done in place

Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for damage beneath the taps and cracks in an acrylic bath, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
High Lane (SK6, SK12)
County
Stockport
Warranty
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

The process

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, including clearing up.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Preparing for the visit

  • Make sure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Avoid using the area for a few hours before we arrive

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

High Lane and nearby

High Lane is about 2 miles south of Marple, in Stockport. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 42 places in Stockport. Our nearest city page is Manchester, about 10 miles away.

Postcode districts we cover here: SK6 and SK12. That includes homes on Woodside Drive, Buxton Road and Orford Close. If you are just outside High Lane, we cover Windlehurst (1 mile north), Middlewood (1 mile south-west), Turf Lea (1 mile north-east), Higher Poynton (1 mile south-west) and Marpleridge (1 mile north-east). Larger places within reach include Stockport (5 miles north-west), Cheadle Hulme (5 miles west), Burnage (7 miles north-west), Bramhall (4 miles west), Reddish (6 miles north-west) and Cheadle (6 miles west).

Near you in High Lane

We visit homes around Poynton High School, Dog and Partridge pub and High Lane Primary School and the streets around them. The closest station to High Lane is Middlewood station, roughly 0.7 miles south-west of the centre. Other landmarks nearby include Avro Heritage Museum (4 miles south-west) and Stepping Hill Hospital (2.9 miles north-west). Open spaces near High Lane include Lantern Pike.

Map of High Lane © OpenStreetMap contributors

Signs you need bath repair in High Lane

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.

Send us a photo if you notice any of these:

  • A failed DIY repair that is discoloured or lifting
  • Impact holes in acrylic
  • Scuffs and scratches in the surface
  • A chip where the taps sit

What to look for in a quote

  • Whether a trained technician does the job
  • What preparation is included
  • What protection goes down before work starts
  • When it can be used again

Choosing a repair company

High Lane questions

Is a bath repair durable?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

How much does bath repair cost in High Lane?

Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

How long before I can use the bath?

Typically within a day, depending on the repair.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Fix dripping taps early to stop staining and limescale
  • Do not leave a fresh chip for long
  • Keep metal cans and razors off the surface
  • Put a towel in the bath if you are working above it

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

What we cannot put right

A repair is not always the answer, and we will tell you before we start. We cannot fix:

  • Cracks in acrylic we can’t reach from underneath
  • Wear across the whole surface, which needs re-enamelling
  • A steel bath rusted through

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

What your bath is made of matters

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

How we price bath repair

Repairs from £95. You won’t pay by the hour. The price is based on:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • Unusual colours or finishes

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • One picture of the whole bath
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings

Email us a picture of the damage and one of the entire item, with your SK6 postcode, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.