Sefton · England
Bath Repair in High Park
Bath repair for High Park, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
Bath repair in High Park without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with cracks in an acrylic bath and damage beneath the taps, we can typically put it right, on acrylic, pressed steel enamel and whirlpool & spa baths alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- High Park (PR9, PR8)
- County
- Sefton
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What else we do in High Park
Common problems we fix in High Park
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The most common problems we’re called about are:
- A chipped rim or side
- Chips under the taps
- Rust by the waste and overflow
- A hole punched through by something heavy
What your quote should include
- Who will actually do the work
- How soon you can use it again
- Whether they match the colour on site
- What happens if they find more damage
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price depends on:
- Unusual colours or finishes
- The type of damage
- The size and number of damaged areas
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
Phone pictures are fine. Just ensure we can see:
- A wider photo showing the whole bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for High Park
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you work in High Park?
Yes. We work across the UK and come to High Park. Send us photos for a fixed quote, or call 0345 017 0787.
Can you repair a hole in a bath?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
High Park and nearby
High Park is about 1 mile north-east of Southport, in Sefton. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in 36 places across Sefton. We work right across the region, from High Park to Liverpool (about 17 miles away).
Postcode districts we cover here: PR9 and PR8. Streets in the area include Roe Lane, Mill Lane and Moss Lane, all of which we cover. Close by, we cover Blowick (1 mile south-west), Churchtown (1 mile north-west), Meols Cop (1 mile south), Marshside (1 mile north) and Southport (1 mile south-west). We also work in nearby towns such as Bootle (13 miles south), Formby (8 miles south-west), Maghull (10 miles south), Litherland (12 miles south), Seaforth (13 miles south) and Ford (12 miles south).
Near you in High Park
Locally, our jobs take us to homes close to Hesketh Park, Presfield High School and Specialist College and Meols Cop High School and the streets around them. Also close by are Bishop David Sheppard Church of England Primary School (under half a mile east) and St Simon & St Jude with All Souls (less than half a mile north). For rail, the closest station is Meols Cop station, roughly 0.5 miles south-west of the centre. Nearby you’ll also find Museum of Buffoonery (1.7 miles west) and Southport General Infirmary (1.1 miles south-west). The countryside around High Park includes Martin Mere and Marshside RSPB reserve.
About our accreditations · Every repair comes with a one-year guarantee.
