Dorset · England
Bath chip & crack repair in Highcliffe, Dorset
Chip and crack repairs to enamel, acrylic and cast iron baths in Highcliffe, carried out at your home and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
What bath repair costs
Prices start from £95. There is no charge for travel to Highcliffe. The price depends on:
- Whether old repairs or coatings need taking off
- What the surface is made of
- How much damage there is
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
You can take the photos on your phone. Just make sure we can see:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Bath repair in Highcliffe, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s a cracked acrylic bath and a kit repair that didn’t last, we can help, whatever the material.
A one-year guarantee comes as standard.
- Where
- Highcliffe (BH23, BH25)
- County
- Dorset
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Highcliffe questions
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Dorset.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Highcliffe and the surrounding area
Highcliffe is about 3 miles east of Christchurch, in Dorset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Highcliffe is one of 462 places in Dorset where we work.
Postcode districts we cover here: BH23 and BH25. Streets in the area include Nea Road, Mill Lane and Holme Road, all of which we cover. Highcliffe sits on or near the A337, so getting to you is simple. We also cover the places around Highcliffe: Walkford (1 mile north-east), Hinton (1 mile north), Barton on Sea (1 mile east), New Milton (2 miles north-east) and Ashley (3 miles north-east). Further out, we also cover Christchurch (3 miles west), Wimborne Minster (13 miles west), Verwood (12 miles north-west), Ferndown (10 miles north-west), Broadstone (13 miles west) and Corfe Mullen (14 miles west).
Near you in Highcliffe
Our customers here include homes close to Parish Church of St Mark, Highcliffe St Mark Primary School and Highcliffe School, among other places. Highcliffe’s nearest station is Hinton Admiral station, about 1.1 miles north-west. Well-known places in the area include Christchurch Hospital (4.1 miles west) and Sammy Miller Motorcycle Museum (1.9 miles north-east). Open spaces near Highcliffe include St Catherine's Hill and Milford on Sea LNR.
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
What you get with us
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Colour-matched on site
Read our full price list and guide to resurfacing and replacement costs.
Aftercare tips
After the repair has cured, a few habits help it last:
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
- Get any new chip repaired before it rusts
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Places near Highcliffe
Other services in Highcliffe
Common problems we fix in Highcliffe
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Keep an eye out for these signs:
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
- Chips caused by builders
Before booking anyone
- What happens if the damage is worse than the pictures show
- What preparation is included
- What protection goes down before work starts
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
