Cornwall · England

Bath Repair in Higher Condurrow

Our technicians come to Higher Condurrow for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Higher Condurrow?

Bath repair in Higher Condurrow, done in place

A typical bath repair is a few hours’ work, and you can normally bathe again the day after. There’s no need to book a plumber or tiler, because the bath does not move. Common call-outs are for chips under the taps and snagging damage from a refit, on cast iron enamel, whirlpool & spa baths and pressed steel enamel.

Big or small, you get the same one-year guarantee in Higher Condurrow and across Cornwall.

Where
Higher Condurrow (TR14)
Region
Cornwall
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Common questions in Higher Condurrow

How invisible is a bath repair?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Do the materials smell?

Expect a mild smell while we’re working.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

What areas do you cover?

All of Cornwall, and the rest of the UK. There is no extra charge for travel.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you repair several things at once?

Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.

Our work in Higher Condurrow

Higher Condurrow is about 1 mile south-east of Camborne, in Cornwall. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover 644 places in Cornwall.

Our repair technicians cover all of TR14 and the streets around it. Other places close to Higher Condurrow include Pengegon (1 mile north-west), Brea (1 mile north), Knave-Go-By (1 mile south-west), Bosleake (1 mile north-east) and Penhallick (1 mile north). Larger places within reach include Truro (11 miles east), Falmouth (10 miles south-east), Redruth (3 miles north-east), Penzance (13 miles south-west), Helston (7 miles south) and Hayle (6 miles west).

What’s near Higher Condurrow

Locally, our jobs take us to homes close to Camborne Science and International Academy, St Michael's Secondary School and Centenary Wesleyan Church, among other places. You’ll also find The Beacon Inn (less than half a mile west) and St John's Catholic Primary School (0.8 miles west). The nearest railway station is Camborne station, roughly 0.9 miles west. Nearby you will also find Carn Brea Castle (1.8 miles north-east) and Kerrier (1 mile north-west). The countryside around Higher Condurrow includes Carnmenellis.

Map of Higher Condurrow © OpenStreetMap contributors

What bath repair costs

Repairs from £95. Every quote is fixed and free. What we look at:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • The type of damage
  • Whether we combine several jobs

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

How to get a fixed price

It only takes a minute to photograph the damage. Please include:

  • A wider photo showing the entire bath
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

Repairing versus replacing in Higher Condurrow

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • A fixed quote before booking
  • Nothing taken out or refitted
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK

See our full price list or resurfacing vs replacement cost guide.

Landlord and trade work in Higher Condurrow

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Leaking fittings, which need a plumber

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

The process

The work is clean and fairly quiet. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Clear the area around the damage
  • Keep a parking space free if you can
  • Tell us about any previous repairs or coatings

How to get a price

Most customers in Higher Condurrow get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Related advice

Do you need bath repair in Higher Condurrow?

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.

The things customers normally mention when they call are:

  • A chipped rim or side
  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
  • A hole punched through by something heavy

Questions to ask before booking

  • What happens if they find more damage
  • If travel is included in the price
  • What prep work is covered
  • A fixed quote, and whether VAT is included

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.