Lancashire · England

Bath Repair for Higher Wheelton homes

Bath repair in Higher Wheelton without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Higher Wheelton

FAQs for Higher Wheelton

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

Will there be a smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

How do I get a price for bath repair in Higher Wheelton?

Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you cover the entire of Lancashire?

We cover the entire UK, including Higher Wheelton and the rest of Lancashire. Send your postcode with your photos and we will offer you dates.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Bath repair at your home in Higher Wheelton

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We’re often asked to fix damage done while the bathroom was being fitted and chips along the edge of the bath, on cast iron enamel, acrylic and roll-top & freestanding.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Where
Higher Wheelton (PR6)
Region
Lancashire
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

What we are called out for in Higher Wheelton

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

Send us a picture if you notice any of these:

  • Rusty patches near the plughole
  • Chips on the rim or sides
  • Holes from dropped items
  • An old repair that has yellowed or come loose

What your quote should include

  • How long it needs to cure
  • How the room is protected while they work
  • Who will actually do the work
  • The length of the guarantee and what it covers

Our hiring checklist

Aftercare tips

To keep it looking its best for years:

  • Clean with warm water and a mild detergent
  • Don’t leave a fresh chip for long
  • Give the bath a quick rinse after use
  • Do not scrub with anything abrasive

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

What bath repair costs

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • Previous DIY repairs that have to come out

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

Two or three clear photos are typically enough. It helps if you send:

  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

What we do, step by step

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift

Get a quote

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a fixed quote

Advice

Our work in Higher Wheelton

Higher Wheelton is about 4 miles north-east of Chorley, in Lancashire. From the centre of Higher Wheelton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 482 towns and villages in Lancashire. You can also see our page for Manchester, about 21 miles away.

Here we cover the PR6 postcode area. From Buckholes Lane, Jenny Lane and Chorley Road or anywhere nearby, a technician can come to you. If you’re just outside Higher Wheelton, we cover Windy Harbour (1 mile south), Brinscall (1 mile south-east), Withnell (1 mile east), Heapey (1 mile south) and Abbey Village (2 miles east). Within a short drive, we also cover Preston (7 miles north-west), Burnley (15 miles north-east), Chorley (4 miles south-west), Bamber Bridge (4 miles north-west), Accrington (10 miles north-east) and Leyland (5 miles west).

Around Higher Wheelton

Typical jobs here are in homes near Withnell Fold Primary School and St Luke's and the streets around them. The closest station to Higher Wheelton is Pleasington station, roughly 3 miles north-east. Well-known places in the area include Chorley and South Ribble District General Hospital (2.9 miles south-west) and South Ribble Museum (3.4 miles north-west). Green spaces nearby include Healey Nab.

Map of Higher Wheelton © OpenStreetMap contributors

Repairing versus replacing in Higher Wheelton

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.

Why Higher Wheelton clients choose us

  • Same prices wherever you are
  • No need to remove anything
  • Accredited with CHAS, Constructionline and SafeContractor
  • Work done at your home or business

See our prices page and bath cost comparison.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Water coming from the waste or taps rather than the bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Higher Wheelton

  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.