Worcestershire · England
Bath chip & crack repair in Hill, Worcestershire
Bath repair in Hill without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Deep scratches in acrylic
- Rust spots around the plughole
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Bath repair in Hill without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. We regularly repair cast iron enamel, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are a chip where the taps sit and holes from dropped items.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Hill (WR10)
- County
- Worcestershire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Once the work has cured, treat it gently:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
- Don’t leave a fresh chip for long
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Signs you need bath repair in Hill
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
The things customers typically mention when they call are:
- Rust spots around the plughole
- A chip where the taps sit
- Chips caused by builders
- Scratches you can feel with a fingernail
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
Before we arrive
- Keep pets and children out of the room while we work
- Open a window if you can
- Mention any parking restrictions or tricky access
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Questions from Hill
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How do I get a price for bath repair in Hill?
Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What affects the price in Hill
Prices start from £95. You won’t pay by the hour. The price is based on:
- Access to the area
- The material and finish
- How many areas need work
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- Natural light rather than flash
- Your postcode, so we can check dates
- Something in shot to show the size
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Other services in Hill
When a repair is not the answer
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Landlords, agents and businesses in Hill
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Repair or replace in Hill?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Fixed prices from your photos
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- One visit for most repairs
Take a look at our pricing or bath cost comparison.
Where we work around Hill
Hill is about 3 miles north-east of Pershore, in Worcestershire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Our technicians cover 376 places in Worcestershire. You can also see our page for Birmingham, about 24 miles away.
Every address in WR10 is covered. Other places close to Hill include Lower Moor (1 mile south-west), Throckmorton (1 mile north), Fladbury (1 mile south-east), Wyre Piddle (1 mile west) and Pinvin (2 miles west). Larger places within reach include Worcester (9 miles north-west), Redditch (12 miles north), Bromsgrove (14 miles north), Great Malvern (13 miles west), Droitwich Spa (10 miles north-west) and Evesham (5 miles south-east).
Near you in Hill
In Hill, that means homes near Saint Thomas and Pershore High School. Hill’s nearest station is Pershore station, about 2.1 miles west. A little further out are Elmley Castle (4.9 miles south). Not far away are Greenhill and Tiddesley Wood.
About our accreditations · Every repair comes with a one-year guarantee.
