Worcestershire · England
Bath Repair in Pinvin
Fixed-price bath repair in Pinvin and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Deep scratches in acrylic
How we handle bath repair in Pinvin
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour matched so it blends in. We regularly repair cast iron enamel, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are scratches you can feel with a fingernail and cracks in an acrylic bath.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Pinvin (WR10)
- Area hub
- Worcestershire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Pinvin
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- A chip where the taps sit
- A chipped rim or side
- Deep scratches in acrylic
- Rust spots around the plughole
Comparing quotes
- How the colour is matched
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Places near Pinvin
Other services in Pinvin
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Pinvin: your questions answered
Can you price it without visiting?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Can a cracked acrylic bath be fixed?
Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Pinvin.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow two to three hours for most chips. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Make sure the area is dry
Get a quote
Email us photos of the damage and one of the entire item, and tell us you are in Pinvin, and we will come back with a fixed quote.
Advice
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Landlord and trade work in Pinvin
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Where we work around Pinvin
Pinvin is about 6 miles north-west of Evesham, in Worcestershire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 376 towns and villages in Worcestershire, from the larger towns to small villages. We work right across the region, from Pinvin to Birmingham (about 24 miles away).
Jobs in WR10 are booked in the same way as anywhere else. From Main Street, Ashfurlong Drive and Spion Kop or anywhere nearby, we can come to you. Close by, we cover Wyre Piddle (1 mile south-east), Pershore (2 miles south), Peopleton (2 miles north-west), Throckmorton (2 miles east) and Lower Moor (2 miles south-east). Larger places within reach include Worcester (7 miles north-west), Redditch (13 miles north-east), Bromsgrove (14 miles north), Great Malvern (11 miles west), Droitwich Spa (9 miles north-west) and Evesham (6 miles south-east).
What’s near Pinvin
Around Pinvin, we work in homes near Pinvin CofE First School, Pershore High School and Church of St Nicholas. Pinvin has its own railway station: Pershore station. Green spaces nearby include Tiddesley Wood.
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
See our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
