Derbyshire · England
Bath chip & crack repair in Holymoorside, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Holymoorside and across Derbyshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage beneath the taps
- A hole punched through by something heavy
Landlord and trade work in Holymoorside
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Bath repair at your home in Holymoorside
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most often call us about a kit repair that didn’t last and rust by the waste and overflow.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Holymoorside (S42)
- Area hub
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Holymoorside
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Customers typically contact us about:
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- A chip where the taps sit
- Rusty patches near the plughole
What to look for in a quote
- How soon you can use it again
- What aftercare is recommended
- How long the guarantee is and what it covers
- How your room will be protected
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Holymoorside and the surrounding area
Holymoorside is about 3 miles south-west of Chesterfield, in Derbyshire. Customers in Holymoorside get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Holymoorside is one of 532 places in Derbyshire we cover. We work right across the region, from Holymoorside to Manchester (about 35 miles away).
Our visits in S42 are booked in the same way as anywhere else. Whether you live on Brook Close, Short Close and Pennywell Drive or anywhere nearby, a technician can come to you. Neighbouring places we cover include Nether Chanderhill (1 mile north), Walton (1 mile east), Harper Hill (1 mile south-east), Old Brampton (2 miles north) and Brampton (2 miles north-east). Within a short drive, we also cover Chesterfield (3 miles north-east), Belper (13 miles south), Heanor (15 miles south-east), Dronfield (6 miles north), Ripley (12 miles south) and Bolsover (9 miles east).
What’s near Holymoorside
Locally, our jobs take us to homes close to St Peter, Brookfield Community School and Walton Holymoorside Primary School and the streets around them. Holymoorside’s nearest station is Chesterfield station, about 3.4 miles north-east. Nearby you will also find Walton Hospital (2.2 miles east). Open spaces near Holymoorside include Beeley Moor.
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Holymoorside. The price comes down to:
- What the surface is made of
- Whether we combine several jobs
- How much damage there is
- The type of damage
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
Two or three clear photos are typically enough. Try to include:
- What it’s made of, if you know
- One sharp close-up of the damage
- Where you are, by postcode
- Any earlier repairs or coatings
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
FAQs for Holymoorside
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How it works
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Related advice
What we cannot put right
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Places near Holymoorside
What else we do in Holymoorside
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Usually one visit, start to finish
- Rooms protected and left tidy
- No need to remove anything
- One-year guarantee on every repair
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
