Shropshire · England
Bath Repair for Hook-a-Gate homes
Bath repair in Hook-a-Gate without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Rusty patches near the plughole
- Impact holes in acrylic
Hook-a-Gate and nearby
Hook-a-Gate is about 2 miles south-west of Belle Vue, in Shropshire. Across the SY3 area, a technician comes to you. Hook-a-Gate is one of 433 towns and villages in Shropshire we cover. Our jobs stretch from Hook-a-Gate to Birmingham (about 40 miles away).
All of SY3 and SY5 is within our area, from the main roads to the quietest streets. Streets in the area include Gorse Lane, Green Lane and Parrs Lane, all of which we cover. Other places close to Hook-a-Gate include Pulley (1 mile east), Bayston Hill (1 mile south-east), Nobold (1 mile north), Redhill (1 mile west) and Meole Brace (1 mile north-east). Within a short drive, we also cover Madeley (14 miles east), Monkmoor (3 miles north-east), Bagley (3 miles north-east), Underdale (3 miles north-east), Coton Hill (3 miles north) and Wem (12 miles north).
Around Hook-a-Gate
Typical jobs here are in homes near Meole Brace School, Christ Church and Oakmeadow Church of England Primary and Nursery School, among other places. For rail, the closest station is Shrewsbury station, about 2.5 miles north-east. A little further out are The Parade Shopping Centre (1.9 miles north) and Shrewsbury Castle (2.4 miles north-east). The countryside around Hook-a-Gate includes Bomere Pool and Haughmond Hill.
Bath repair in Hook-a-Gate without replacing anything
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We’re often asked to fix chips caused by builders and damage beneath the taps, on whirlpool & spa baths, acrylic and pressed steel enamel.
Every job is backed for twelve months in Hook-a-Gate and everywhere else. If something goes wrong with the work, we come back.
- Where
- Hook-a-Gate (SY3, SY5)
- Area hub
- Shropshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Hook-a-Gate
- Work done at your home or business
- We leave the room as we found it
- No extra charge for your area
- Colours mixed by hand to suit your surface
See our prices page or guide to resurfacing and replacement costs.
Common questions in Hook-a-Gate
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How do I get a price for bath repair in Hook-a-Gate?
Prices start from £95. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SY3 postcode.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What areas do you cover?
All of Shropshire, and the rest of the UK. There is no extra charge for travel.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Stick to mild cleaners and a soft cloth
- Don’t scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Landlords, agents and businesses in Hook-a-Gate
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Towns and villages near Hook-a-Gate
More services for Hook-a-Gate
Do you need bath repair in Hook-a-Gate?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The most common problems we are called about are:
- Impact holes in acrylic
- Chips caused by builders
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
What to look for in a quote
- Who will actually do the work
- What aftercare is recommended
- What happens if they find more damage
- Whether there are any call-out or travel charges
The process
We agree an arrival time beforehand. Once we are there, the work takes a few hours, depending on the damage. The room is left tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know about parking or access
- Clear the area around the damage
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
