Cambridgeshire · England
Bath chip & crack repair in Hook, Cambridgeshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Hook, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
Bath repair in Hook without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are a cracked acrylic bath and chips on the rim or sides.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Area
- Hook (PE15)
- Area hub
- Cambridgeshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a few hours, depending on the damage. The room is left tidy and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Get a quote
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Hook, and we will reply with a fixed quote.
Advice
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Also near Hook
More services for Hook
Aftercare tips
To keep it looking its best for years:
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Common problems we fix in Hook
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People normally call us when they notice something like this:
- Rusty patches near the plughole
- Chips on the rim or sides
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
Comparing quotes
- What protection goes down before work starts
- How soon you can use it again
- If travel is included in the price
- What preparation is included
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Prices and what affects them
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- Whether we combine several jobs
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Natural light rather than flash
- Something in shot to show the size
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
FAQs for Hook
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Are there extra charges for Hook?
We do not add a call-out fee. The fixed price covers the visit and the work.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Hook
- Normally one visit, start to finish
- Colour mixed on the day to match
- A year’s guarantee on all work
- Honest advice, even when it means no job
See our prices page and resurfacing vs replacement cost guide.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Hook
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Our work in Hook
Hook is about 2 miles south-east of March, in Cambridgeshire. We travel to clients in Hook, so there’s no workshop to go to. We work in all 371 towns and villages in Cambridgeshire. We work right across the region, from Hook to London (about 71 miles away).
Jobs in PE15 are booked in the same way as anywhere else. Other places close to Hook include Wimblington (1 mile south-west), Stonea (2 miles east), March (2 miles north-west), Doddington (3 miles south-west) and Horseway (4 miles south). Larger places within reach include Wisbech (10 miles north), St Ives (15 miles south-west), Ely (11 miles south-east), Whittlesey (10 miles west), Chatteris (5 miles south-west) and Yaxley (15 miles west).
Landmarks near Hook
Around Hook, we work in homes near Neale-Wade Academy. Hook’s nearest station is March station, about 2.8 miles north. Further afield, we also cover the area around March And District Museum (2.1 miles north-west). Not far away are Norwood Road.
About our accreditations · Every repair comes with a one-year guarantee.
