Hampshire · England
Bath Repair in Hook Park Estate
Bath repair in Hook Park Estate without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Chips along the edge of the bath
Bath repair at your home in Hook Park Estate
Most of our bath repairs take a few hours, and you can typically bathe again the following day. You won’t need a plumber or tiler, because the bath does not move. Our repair technicians work on roll-top & freestanding, acrylic and whirlpool & spa baths, and common reasons people get in touch are cracks in an acrylic bath and a chipped rim or side.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Hook Park Estate (SO31)
- County
- Hampshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Hook Park Estate
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a few hours, depending on the damage, and we will tell you if anything changes.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Let the surface dry out before the visit
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Wear across the whole surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
What bath repair costs
Repairs from £95. We price every job individually. The main factors are:
- Whether it’s a chip, crack, burn or wear
- The material
- The size and number of damaged areas
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- The material, if you know it
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Work for landlords and builders
Landlords, letting agents and housing providers in Hook Park Estate use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
Once the work has cured, treat it gently:
- Put a towel in the bath if you are working above it
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Towns and villages near Hook Park Estate
Also in Hook Park Estate
About Hook Park Estate
Hook Park Estate is about 4 miles west of Fareham, in Hampshire. We visit homes and businesses in Hook Park Estate and the surrounding area, so nothing has to leave your home. We work in 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Hook Park Estate to London (69 miles away).
Here we cover the SO31 postcode area. Local streets include Solent Drive, Hook Park Road and Cowes Lane, and we cover them all. Neighbouring places we cover include Hook (1 mile north-east), Warsash (1 mile north), Abshot (1 mile east), Sarisbury Green (2 miles north) and Titchfield Common (2 miles north-east). We also work in nearby towns such as Winchester (15 miles north), Gosport (7 miles east), Havant (14 miles east), Eastleigh (9 miles north), Fareham (4 miles east) and Horndean (13 miles east).
Landmarks near Hook Park Estate
Locally, our jobs take us to homes close to Hook-With-Warsash Church of England Academy, The Rising Sun pub and Brookfield Community School and Language College and the streets around them. Nearby too are Hamble Common (1.3 miles north-west) and Church of St Mary (0.5 miles north). The closest station to Hook Park Estate is Hamble station, about 2.6 miles north-west. Well-known places in the area include Coldeast (2.1 miles north) and St Andrew's Castle (1.3 miles north-west). The countryside around Hook Park Estate includes Holly Hill Woodland Park.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Straight answers about what a repair can do
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- One visit for most repairs
See our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
