Derbyshire · England

Bath Repair in Horse Dale

Chip and crack repairs to enamel, acrylic and cast iron baths in Horse Dale, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips caused by builders
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Horse Dale?

About our bath repair in Horse Dale

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for rust spots around the plughole and an old repair that has yellowed or come loose, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Before and after: a chipped, rust-stained bath around the plughole
Where
Horse Dale (DE4)
County
Derbyshire
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

When to call us in Horse Dale

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.

Common reasons people in Horse Dale contact us are:

  • Snagging damage from a refit
  • Hairline or through cracks in acrylic
  • A chip where the taps sit
  • Scuffs and scratches in the surface

Comparing quotes

  • How long it needs to cure
  • What aftercare is recommended
  • Who will actually do the work
  • A fixed quote, and whether VAT is included

Choosing a repair company

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.

How it works

We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Make sure the area is dry
  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

Get a fixed price

Advice

Honest limits

In fairness, some problems need a different fix:

  • Acrylic cracks with no access behind them
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Horse Dale

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

Horse Dale questions

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Can you redo someone else’s repair?

Usually, yes. The old repair comes out first.

Can you quote from photos?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Which areas do you work in?

All of Derbyshire, and the rest of the UK. There is no extra charge for travel.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

How long does the repair take to cure?

Typically within a day, though it depends on what we’ve done.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Will the repair show?

We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Looking after it afterwards

So the finish stays in good condition for years:

  • Stick to mild cleaners and a soft cloth
  • Get any new chip repaired before it rusts
  • A dripping tap stains enamel, so fix it early
  • Make sure an acrylic bath is firm underfoot

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

Why Horse Dale clients choose us

  • Fixed prices from your pictures
  • Colour mixed on the day to match
  • Same prices wherever you are
  • We leave the room as we found it

Take a look at our pricing and bath cost comparison.

Where we work around Horse Dale

Horse Dale is about 3 miles south-west of Matlock, in Derbyshire. Whether you are in the middle of Horse Dale or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Horse Dale is one of 532 places in Derbyshire we cover. You can also see our page for Manchester, about 35 miles away.

We cover every part of the DE4 postcode area. From Bell Lane, Slaley Lane and Uppertown Lane or a nearby road, we can come to you. If you’re just outside Horse Dale, we cover Winster (2 miles north-west), Upper Town (3 miles north-west), Warrencarr (3 miles north), Birchover (3 miles north-west) and Stanton Lees (3 miles north). Further out, we also cover Chesterfield (11 miles north-east), Belper (8 miles south-east), Heanor (13 miles south-east), Dronfield (14 miles north-east), Ripley (10 miles south-east) and Bolsover (15 miles north-east).

What’s near Horse Dale

In Horse Dale, that means homes near St James the Apostle's Church, Heights of Abraham and Barley Mow pub, among other places. The closest station to Horse Dale is Matlock Bath station, roughly 1.8 miles east. Nearby you’ll also find Willersley Castle (1.9 miles east) and Whitworth Hospital (2.4 miles north-east). Open spaces near Horse Dale include Harboro' Rocks.

Map of Horse Dale © OpenStreetMap contributors

What bath repair costs

Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • How many items we do on one visit
  • The colour and finish to match
  • The material and finish

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • Natural light rather than flash
  • A clear, close picture of the problem area
  • A wider photo showing the entire bath
  • The postcode, so we can plan the visit

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.