Derbyshire · England
Bath Repair in Hulland Ward
Bath repair in Hulland Ward without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- A kit repair that didn’t last
- A hole punched through by something heavy
Do you need bath repair in Hulland Ward?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Get in touch if you’ve noticed any of these:
- Chips under the taps
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Snagging damage from a refit
Questions to ask before booking
- How changes to the job are handled
- Whether they match the colour on site
- Aftercare advice
- Whether cleaning and preparation are in the price
Bath repair at your home in Hulland Ward
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Typical jobs include scratches you can feel with a fingernail and impact holes in acrylic, on acrylic, pressed steel enamel and cast iron enamel.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Hulland Ward (DE6)
- County
- Derbyshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Hulland Ward
Other services in Hulland Ward
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About Hulland Ward
Hulland Ward is about 6 miles west of Belper, in Derbyshire. Our repair technicians come to customers in Hulland Ward and nearby villages, so there is no workshop to go to. We work in 532 places across Derbyshire, from the larger towns to small villages. We work right across the region, from Hulland Ward to Birmingham (about 40 miles away).
Our visits in DE6 work the same way as everywhere else we cover. Jobs here include addresses on Firs Avenue, Moss Lane and Greenway. We also cover the places around Hulland Ward: Upper Biggin (1 mile north), Millington Green (1 mile north-east), Hulland (1 mile west), Atlow (1 mile north-west) and Kirk Ireton (2 miles north). Larger places within reach include Ilkeston (13 miles east), Belper (6 miles east), Heanor (11 miles east), Ripley (9 miles east), Langley Mill (12 miles east) and Matlock (9 miles north).
Landmarks near Hulland Ward
Our customers here include homes close to Christ Church and Hulland CofE Primary School and the streets around them. Further afield, we also cover the area around St Oswalds Hospital (5.1 miles west). For a walk, there is Alport Height.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
FAQs for Hulland Ward
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Do you cover Hulland Ward?
Yes. We cover the entire UK and travel to Hulland Ward. Send pictures and we’ll quote, or call 0345 017 0787.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Repair or replace: which is better?
Many people think a damaged bath means a new one. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Colour mixed on the day to match
- Typically one visit, start to finish
- One-year guarantee on every repair
- No extra charge for your area
Take a look at our full price list or bath cost comparison.
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Hulland Ward. What changes the price is:
- What the surface is made of
- The type of damage
- How easy the damage is to reach
- How much damage there is
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A photo taken from further back
- Any details about the material
- Something in shot to show the size
- The postcode, so we can plan the visit
Send us photos of the damage and a wider shot of the entire item, and tell us you are in Hulland Ward, and we’ll reply with a fixed price.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Ensure the area is dry
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
