Lancashire · England
Bath Repair for Hundred End homes
Problem with your bath in Hundred End? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
About our bath repair in Hundred End
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Typical jobs include rusty patches near the plughole and a cracked acrylic bath, across pressed steel enamel, acrylic and whirlpool & spa baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Hundred End (PR4)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Hundred End
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How much does bath repair cost in Hundred End?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What else we do in Hundred End
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you’re working above it
- Make sure an acrylic bath is firm underfoot
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Hundred End, we’ll quote for several properties at once. Send photos for each one and we will price them together.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, depending on the damage. We clean up when we’re done and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Straight answers about what a repair can do
- Usually one visit, start to finish
- No extra charge for your area
- Dust sheets down, tidy finish
See our full price list and guide to resurfacing and replacement costs.
About Hundred End
Hundred End is about 6 miles north-east of Southport, in Lancashire. Jobs in Hundred End are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 482 towns and villages in Lancashire, from the larger towns to small villages. We work right across the region, from Hundred End to Liverpool (about 20 miles away).
Our technicians cover all of PR4 and the streets around it. Streets in the area include Anchorage Avenue, Taylor's Meanygate and Hundred End Lane. Close by, we cover Becconsall (2 miles east), Holmes (2 miles south-east), Mere Brow (2 miles south), Tarleton (2 miles east) and Sollom (3 miles south-east). Within a short drive, we also cover Preston (9 miles north-east), Chorley (11 miles east), Lytham St Anne's (7 miles north-west), Bamber Bridge (9 miles east), Leyland (8 miles east) and Fulwood (9 miles north-east).
Landmarks near Hundred End
Our clients here include homes close to Tarleton Academy and the streets around them. The nearest railway station is Croston station, roughly 4.6 miles east. A little further out are Greaves Hall (1.8 miles south-west). Green spaces nearby include Martin Mere and Marshside RSPB reserve.
When a repair is not the answer
A repair is not always the answer, and we would rather say so up front. We cannot fix:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Hundred End
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
What affects the price in Hundred End
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The size and number of damaged areas
- The colour and finish to match
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
