Powys · Wales

Bath Repair in Hundred House

Bath repair for Hundred House, without a refit. Send us pictures for a fixed price, then we come to you.

  • Repairs from £95
  • Damage beneath the taps
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Hundred House

Bath repair at your home in Hundred House

We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. If you are dealing with a chipped rim or side and a cracked acrylic bath, we can generally put it right, on cast iron enamel, roll-top & freestanding and pressed steel enamel alike.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Area
Hundred House (LD1)
Region
Powys
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

What bath repair costs

Prices start from £95. You’ll know the full cost before you book. We look at:

  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

Photographing the damage takes a minute. Try to send:

  • A wider photo showing the whole bath
  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

When to call us in Hundred House

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

Look out for any of the following:

  • Scratches you can feel with a fingernail
  • Chips under the taps
  • Rust spots around the plughole
  • Cracks in an acrylic bath

What your quote should include

  • Is the price fixed, and does it include VAT?
  • Aftercare advice
  • How the room is protected while they work
  • Whether cleaning and preparation are in the price

How to compare quotes

What we cannot put right

In fairness, there are a few things a repair won’t fix:

  • Leaking fittings, which need a plumber
  • Cracks in parts of an acrylic bath we cannot get to from below
  • A bath that moves underfoot, until its support is fixed

Send us photos and we’ll tell you honestly.

What we work on

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

Why repair rather than replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • Honest advice, even when it means no job
  • We leave the room as we found it
  • One visit for most repairs
  • A fixed quote before you book

Read our full price list and bath cost comparison.

Hundred House and the surrounding area

Hundred House is about 23 miles south of Y Drenewydd, in Powys. Across the LD1 area, we carry out the work at your property. Our repair technicians cover all 234 towns and villages in Powys, from the larger towns to small villages. We work right across the region, from Hundred House to Birmingham (63 miles away).

Here we cover the LD1 postcode area. Being close to the A481, Hundred House is simple for us to get to. If you are just outside Hundred House, we cover Llanelwedd (4 miles south-west), Crossway (4 miles north-west), Hawy (5 miles north-west), Llanfair-ym-Muallt (5 miles south-west) and Llandrindod Wells (5 miles north-west). We also work in nearby towns such as Knighton (15 miles north-east), Presteigne (14 miles north-east), Rhayader (12 miles north-west), Talgarth (13 miles south) and Llanwrtyd Wells (15 miles west).

Local landmarks in Hundred House

We visit homes around Hundred House Inn and the streets around them. Nearby you’ll also find Hundred House (under half a mile east) and Builth Wells Hospital (5.2 miles south-west). For a walk, there is Llyn-y-Waun and Perthi Common.

Map of Hundred House © OpenStreetMap contributors

How it works

We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can usually use the bath the day after.

How to prepare

  • Let the surface dry out before the visit
  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children

How to get a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.

Get a free quote

Related advice

Repairs by material

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

How to look after the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Rinse it down after each bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Put a towel in the bath if you are working above it
  • Ensure an acrylic bath is firm underfoot

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

Hundred House questions

Can you redo an old repair?

Regularly. We strip it out, deal with any rust and repair it again.

Do you come to Hundred House?

We do. We send a technician to Hundred House for every job, with no extra charge for travel.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

How do I get a price for bath repair in Hundred House?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.