Powys · Wales
Bath chip & crack repair in Crossway, Powys
Damaged bath in Crossway? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Crossway
A typical bath repair is a few hours’ work, and you can usually bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for chips caused by builders and a kit repair that didn’t last, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Big or small, it’s backed by a one-year guarantee.
- Where
- Crossway (LD1)
- Region
- Powys
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Crossway
Crossway is about 21 miles south of Y Drenewydd, in Powys. We visit homes and businesses in Crossway and the surrounding area, so there’s no workshop to go to. Crossway is one of 234 towns and villages in Powys we cover. Our jobs stretch from Crossway to Birmingham (about 66 miles away).
We cover every part of the LD1 postcode area and the streets around it. If you are just outside Crossway, we cover Hawy (1 mile north), Llandrindod Wells (2 miles north), Gwystre (5 miles north), Llanbadarn Fawr (5 miles north-east) and Crossgates (5 miles north-east). Larger places within reach include Llanfair-ym-Muallt (4 miles south), Rhayader (8 miles north-west), Llanelwedd (4 miles south) and Llanwrtyd Wells (13 miles south-west).
Local landmarks in Crossway
Locally, our jobs take us to homes close to Llandrindod High School, St David's Church and Drovers Arms, among other places. For rail, the closest station is Llandrindod station, about 2.3 miles north of the centre. A little further out are Disserth and Trecoed (0.9 miles west) and Llandrindod Wells Memorial Hospital (2.4 miles north). Open spaces near Crossway include Pentrosta Mire and Poultry Farm Hill.
Nearby places to Crossway
Other services in Crossway
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- Work done at your home or business
Read our pricing and bath cost comparison.
How to look after the repair
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Get any new chip repaired before it rusts
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
What affects the price in Crossway
Prices start from £95. We charge the same across the UK, including Crossway. The price reflects:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Unusual colours or finishes
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Your postcode, so we can check dates
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
For landlords and businesses
For anyone letting property in or around Crossway, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Powys and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Getting a price
For a price in Crossway, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Your questions about bath repair in Crossway
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
What happens next?
You’ll get a fixed quote back. There is no obligation to book.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Crossway
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
