Swansea · Wales
Bath Repair in Ilston
Bath repair in Ilston without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
About our bath repair in Ilston
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for a chipped rim or side and snagging damage from a refit, in acrylic, pressed steel enamel and roll-top & freestanding.
Every repair comes with our one-year guarantee, wherever you are in Swansea.
- Where
- Ilston (SA3, SA2)
- County
- Swansea
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
When a repair isn’t the answer
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What else we do in Ilston
Common questions in Ilston
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Is a cracked acrylic bath repairable?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before you book.
What you get with us
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Colour mixed on the day to match
Take a look at our full price list and guide to resurfacing and replacement costs.
What affects the price in Ilston
Repairs from £95. There is no charge for travel to Ilston. The price depends on:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- How easy the damage is to reach
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
It only takes a minute to photograph the damage. Please include:
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
What we are called out for in Ilston
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Clients generally contact us about:
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Impact holes in acrylic
- Chips on the rim or sides
Questions to ask before you book
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Whether they match the colour on site
How to care for the repair
To keep it looking its best for years:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Ilston and the surrounding area
Ilston is about 5 miles south of Gorseinon, in Swansea. Anywhere in SA3, we carry out the work at your property. Our technicians cover all 153 towns and villages in Swansea.
All of SA3 and SA2 is within our area. Being close to the A4118, Ilston is easy for our repair technicians to reach. Nearby, we also work in Lunnon (1 mile south-west), Sandylane (1 mile south), Pennard (1 mile south-east), Kittle (1 mile south-east) and Southgate (2 miles south). We also work in nearby towns such as Swansea (6 miles north-east), Castle (6 miles east), Morriston (8 miles north-east), Mount Pleasant (6 miles east), Gorseinon (5 miles north) and Dyfaty (6 miles east).
Near you in Ilston
Locally, our jobs take us to homes close to The Gower Inn, Church Of St Illtyd and Bishopston Comprehensive School, among other places. Ilston’s nearest station is Gowerton station, roughly 4.3 miles north-east of the centre. A little further out are Fairwood Hospital (2.1 miles north-east) and Park Mill (0.9 miles south-west). Not far away are Broad Pool and Mynydd-bach-y-cocs.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Let the surface dry out before the visit
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
