Derbyshire · England
Bath Repair for Inkersall homes
Bath repair across Inkersall and nearby, done in a single visit in most cases.
- Repairs from £95
- Snagging damage from a refit
- A kit repair that didn’t last
Bath repair at your home in Inkersall
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are chips along the edge of the bath and damage done while the bathroom was being fitted.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Inkersall (S43)
- Area hub
- Derbyshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Inkersall
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Common reasons people in Inkersall contact us are:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- An old repair that has yellowed or come loose
Comparing quotes
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- Aftercare advice
- What preparation is included
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the following day, the bath is ready to use.
Getting ready for the visit
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
Get a quote
Upload a picture of the damage and a wider shot of the whole item, with your S43 postcode, and we will reply with a fixed price.
Read more
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Inkersall as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- The material
- Doing more than one item at once
- The type of damage
- Access to the area
Our prices are the same across the UK, with no extra for Inkersall. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- The material, if you know it
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say straight away whether it can be repaired.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Inkersall and nearby
Inkersall is about 1 mile south-west of Staveley, in Derbyshire. Anywhere in S43, a technician comes to you. We work in all 532 towns and villages in Derbyshire. Our nearest city page is Manchester, about 38 miles away.
Postcode districts we cover here: S43. Jobs here include addresses on Denby Road, Crich Road and Kinder Road. Other places close to Inkersall include Hollingwood (1 mile north-west), Staveley (1 mile north-east), Brimington (1 mile north-west), Calow (1 mile south-west) and Arkwright Town (1 mile south-east). Further out, we also cover Chesterfield (3 miles west), Dronfield (5 miles north-west), Ripley (14 miles south), Bolsover (4 miles east), Matlock (11 miles south-west) and Clay Cross (6 miles south).
Around Inkersall
Typical jobs here are in homes near Springwell Community School, St Columba and Inkersall Primary Academy, among other places. You will also find Poolsbrook Country Park (1.2 miles north-east), Miners Arms (0.8 miles south-west) and Springwell Community School (0.5 miles north-east). The nearest railway station is Chesterfield station, roughly 2.1 miles south-west of the centre. Other landmarks nearby include Bolsover Castle (3.5 miles south-east) and Chesterfield Royal Hospital (1.5 miles south-west).
- Other local spots include Municipal Borough of Chesterfield (2.2 miles south-west)
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Why Inkersall customers choose us
- Work done at your home or business
- Rooms protected and left tidy
- Colour-matched on site
- Free fixed quotes from pictures
Read our prices page and bath cost comparison.
Places near Inkersall
Other services in Inkersall
Inkersall questions
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
How long does the repair take to cure?
Generally the next day. We will tell you the exact curing time when we finish.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you work in Inkersall?
Yes, we do. Technicians travel to Inkersall from across the region, with no extra charge for travel.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Aftercare tips
To keep it looking its best for years:
- Ensure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
- Have new chips seen to early
- Rinse it down after each bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
About our accreditations · Every repair comes with a one-year guarantee.
