Gloucestershire · England
Bath Repair in Innsworth
Bath repair in and around Innsworth: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Rust spots around the plughole
Should you replace it?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Innsworth clients choose us
- Most jobs done in one visit
- No extra charge for your area
- Straight answers about what a repair can do
- No need to remove anything
See our prices page or bath cost comparison.
Bath repair at your home in Innsworth
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include an old repair that has yellowed or come loose and a chipped rim or side, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Innsworth (GL3, GL2)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
After the repair has cured, a few habits help it last:
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Put a towel in the bath if you’re working above it
- Ensure an acrylic bath is firm underfoot
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Our work in Innsworth
Innsworth is about 3 miles north-east of Gloucester, in Gloucestershire. Anywhere in GL3, we carry out the work at your property. Our technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 42 miles away.
Here we cover the GL3 and GL2 postcode area. We regularly work on streets such as Brampton Square, Coriander Drive and Salvia Close and the roads around them. Main roads around Innsworth include the B4063, so getting to you is simple. We also cover the places around Innsworth: Churchdown (1 mile south-east), Bamfurlong (2 miles east), Golden Valley (2 miles east), Hucclecote (3 miles south) and Up Hatherley (3 miles east). Further out, we also cover Cheltenham (5 miles east), Gloucester (3 miles south-west), Stroud (10 miles south), Tewkesbury (7 miles north), St Paul's (5 miles east) and Lansdown (5 miles east).
Near you in Innsworth
We visit homes around St John the Evangelist, St Mary's Catholic Primary School and Churchdown School, among other places. The closest station to Innsworth is Gloucester station, about 2.5 miles south-west. Other landmarks nearby include Gloucester Castle (3 miles south-west) and Kings Walk Shopping Centre (2.7 miles south-west). For a walk, there is Chosen Hill and Lassington Wood.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
Arrival times are agreed in advance. On site, it takes a few hours, depending on the damage. We leave the room clean and you’ll know when it can be used.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Your questions about bath repair in Innsworth
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
What happens next?
We come back with a fixed price, plus dates. There is no obligation to book.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- Where the damage is and how we get to it
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material and finish
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Getting a price from pictures
We price nearly every job from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Any details about the material
- A picture taken from further back
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Signs you need bath repair in Innsworth
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Customers typically contact us about:
- A failed DIY repair that is discoloured or lifting
- Rusty patches near the plughole
- Snagging damage from a refit
- Chips along the edge of the bath
What to look for in a quote
- How changes to the job are handled
- How long it needs to cure
- What preparation is included
- What aftercare is recommended
Nearby places to Innsworth
Other services in Innsworth
About our accreditations · Every repair comes with a one-year guarantee.
